The mighty Super Combat cutting laps at Classic Dirt 12

http://youtu.be/VSafiqm4uyI

Had a ball all weekend, the super combat went like a clock. Again only 2 Hodaka's there, mine & Ken Smiths Wombat.

Ok ta mate, left stock pipe on last weekend with the new 32mm, but had an ignition failure on sat so gotta sort that 1st. Was honking with the new carb though

The more the merrier, had some jetting issues at classic dirt, turned out the main jet was super glued in as someone had stripped the thread in the emulsion tube. Gonna throw the HT2 pipe on for this weekend, just need to get jetting sorted. Can't wait for CD again this yr

Gday guys,
just about to fit the HT2 pipe I've had sitting here for ages on my Super Combat, has anyone got any jetting specs? Just being a bit lazy n trying to save some time at the track on sat.

Look at these handsome roosters, taken classic dirt 2015, green park, Connondale, Australia

No worries mates, glad to catch up n hang with u guys. Awesome event!

Paul on the track

Al good at classic dirt, got the super combat flying the flag

Can u throw some parts in your suitcase?

I just ordered a new Acerbis Helmet, at 1250grams it is lighter then the $500 Fox V4 Carbon, and only $250 retail here in oz.

Finally got the Super Combat ready to race. It's was always to be a tidy up & general sort out rather then a full on resto, this one is meant to be banging bars (done too many resto's in past that go out of control & end up too good to even ride). Had to just cleanup rear spokes & reasse...

Think you are correct there Brian, your suspicions are spot on, the angles for 3 cross won't work. To redrill a Rim in such good condition for age would just destroy it. Will see if Paul can supply the shorter spokes. Thanks for your help.
Cheers
Jeff

No it's a 1.85x18" alloy DID old style (ie with just a size sticker, no size or build date stamped in rim, with the old DID logo stamped.

Yes Paul, I received both sets of spokes from you, the front wheel has already been done and the spokes were fine. Just not sure if it is actually a 97 wheel or maybe incorrect spokes? Also the nipples won't fit through the holes in rim (although no big deal, I often redrill rims when upgrading to s...

Hi everybody, I just went to respoke the rear wheel of my Super Combat, and the supplied spoke kit does not fit. The kit part no is 979211, which going off the parts fiche should be correct. The new spokes are way too long. Either incorrect spokes in packet or incorrect wheel fitted on bike?? Cheers...

Racetech or smart performance prob won't have a listing, but they usually dig up any odd stuff I need, may have to disassemble and measure seal sizes etc, but should be able to get parts no probs.


http://www.smartperformanceinc.com/CONTACT.html

http://www.racetech.com

Info re Maxima K2 100% synthetic oil: Technical 2 - stroke oils vary in grades from one - being the lowest to five - being the highest grade - Maxima K2 formula falls into the grade 5 HIGHEST category. For use in air-cooled or liquid-cooled 2-strokes that are pre-mix. (Not oil injected-or Autolube, ...

And the smell!

Info regarding Maxima 927 from another site. http://www.lambrettaspares.com/spares/oils-and-lubricants/oil,-2-stroke,-castor-927-racing,-pre*mix-only-(do-not-mix-with-other-oils)-maxima/mbu0525.html Oil, 2 stroke, Castor 927 Racing, Pre-Mix only (do not mix with other oils) Maxima MRB have researche...

Got 1st good ride in on it today, went like a champion. Shifted great, jetting was pretty close, power was good. Bit of a nervous nelly moment when the front brake cable got caught in the triple clamps (my own fault for putting the front end in arse about, waiting for head bearing races to come befo...

Roger that!

Hi all, I've been trying to upload a video of the Super Combat running, but can't seem to find a format that will upload? I've tried mov, mp4, avi, wmv. It just says "the extension mov is not allowed". Any suggestions? In the FAQ's it says allowable file types are controlled by admin. Chee...