Head gasket leak

The main Page for the Hodaka Club Discussion Group
Post Reply
budpat105
Posts: 63
Joined: Sun May 24, 2015 12:21 pm

Head gasket leak

Post by budpat105 »

So, I noticed some black oily on the top fin of cylinder of Combat. looks like head gasket may be leaking. That's just a guess on my part. Can I just retorque head? Pull head and install new head gasket without disturbing base gasket? Replace both gaskets?
thrownchain
Posts: 1920
Joined: Sun Jul 21, 2013 8:52 am

Re: Head gasket leak

Post by thrownchain »

New gasket and retorque ,make sure both gasket surfaces are clean , also check to make sure head isn’t warped.
viclioce
Posts: 4868
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: Head gasket leak

Post by viclioce »

You can anneal the head gasket and see if it seals. Heat the metal gasket up with a propane torch so it expands where it seals. Then let cool & reassemble. You may want to replace it anyway, but at least you can still ride while you wait for a new one to come! :ugeek: Victor

1978 175SL
1976 03 Wombat
1975 Road Toad 2
1974 98 Super Rat
1974 97 Super Combat
1973 96 Dirt Squirt 2
1973 Wombat Combat
1973 Combat Wombat
1972 94 Wombat
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B 2
1968 92 Ace 100
1966 Ace 90
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests