Page 1 of 1
250 Ed torque setting
Posted: Fri Dec 27, 2019 5:19 pm
by joshandlisa
Hi guys,
Merry Christmas and happy new year to all.
Guys I’m wWondering if anyone would be able to tell me the Torque settings for the 4 head studs on the 250 thunder dog.
Thanks in advance
Re: 250 Ed torque setting
Posted: Fri Dec 27, 2019 5:27 pm
by taber hodaka
170 to 200 inch pounds I think?? -----------------Clarence
Re: 250 Ed torque setting
Posted: Fri Dec 27, 2019 5:30 pm
by viclioce
It’s also 14-16.5 foot/pounds. Just divide by 12!
Re: 250 Ed torque setting
Posted: Sat Dec 28, 2019 6:57 am
by Bullfrog
More than 200 in-lbs I think. I should be in the same room as an Owners Manual some time over the weekend to check. In the meantime you might surf thru the Hodaka Parts dot com website. The torque spec may be there.
Ed
Re: 250 Ed torque setting
Posted: Sat Dec 28, 2019 4:03 pm
by Bullfrog
The Owner's Manual lists 200 in-lbs for the 4 cylinder head nuts and 170 in-lbs for the 4 (smaller) cylinder head bolts on the 250 ED.
Ed
Re: 250 Ed torque setting
Posted: Sat Dec 28, 2019 7:52 pm
by joshandlisa
champion!! Thanks Guys. All the best for the new year!