glad to help

Rich

do you mean take crank apart? If so its done with a press

Rich

do you mean take crank apart? If so its done with a press

Rich

gasket goes againt the cylinder

Rich

make float arms paralell with carb body when up side down

Rich

here are the seal sizes for the 250 , sorry I dont have the location for you but you should be able to figure which one you dont have

25x42x8
32x42x7
32x52x8
16x24x4 kick shaft

Rich

Thank you. I probably wont be going there any longer either , I just cant afford it since i have been divorced , my income is from porting and carb work only and as you know porting is a luxury not a necessity not everyone needs it , but I do ok with that.

Rich

Harry Taylor should be remembered fondly , He was a big part of Hodaka days , he gave of himself alot . He was a great friend to me and taught me much as my mentor in porting , I miss him and Patty greatly . These pics I believe where from 2001

Rich

I will get back with you later or call me later 702-858-9177

Rich

Gregg is the best at what ever he does

Rich

I do have a wombat tank with perfect original chrome and no dents but has rust inside

Rich

that is correct

Rich

your welcome , it will be cool to hear what you come up with

Rich

I used the tapered bearings and had to shim the race to make fit, also had to modify the stem for correct length. All one needs id a bunch of misc parts for trial fit and modify as necessary. No specifics, the swing arm was the hard part

Rich

disc brakes on both ends , I used a 1985 Honda XL350 front end and a 1989YZ 250 back end on my Hodaka 175 frame 250 . Where there is a will there is a way.

Rich

Well I wont be there but you can call me if you want 702-858-9177

Rich

I can build that for you if you are serious .

Rich

also the combat wombat has a narrow intake manifold stud pattern like a Iron wombat and a 93 super rat, supercombat is wider. And the victory port is waay different even if the caomat port is drilled

Rich

A reeded carb will normally require 6 to 10 steps larger main jet and sometimes a richer needle ot a raising of stock needle (dropping clip)

Rich

Yes that ignition will work on a combat wombat and its a great up grade to have an advance curve and no flywheel

Rich

If you look closely at the center hub you will probably see a shadow marking where the splines were and that will go toward the shaft. Im thinking that its the same either way but you can verify by how it lines up with the small primary gear

Rich

I have one I just have to decide if I want to part with it

Rich

what year squirt ?

Rich

If I could see it I can let you know If I can repair it ,maybe text me a picture . 702-858-9177

Rich

Only if it had the rat pipe , carb , head and ignition

Rich