Page 1 of 1
Can someone please post a photo of the wombat 125 kickstand
Posted: Fri Aug 08, 2014 4:57 pm
by amanda11270
I just recently picked up a wombat 125 and the previous owner cut off the kickstand where it mounts to the frame, I am a pretty good fabricator, I plan on rewelding a mount and fabbing a new stand/spring. Just need to see what that area looked like from Hodaka. Thanks
Re: Can someone please post a photo of the wombat 125 kickst
Posted: Sat Aug 09, 2014 9:36 am
by Dale
I will give this a try. My good camera is in the repair shop, so these might be of limited use to you...
Re: Can someone please post a photo of the wombat 125 kickst
Posted: Sat Aug 09, 2014 11:27 am
by amanda11270
Those are absolutely perfect, thanks alot!
Re: Can someone please post a photo of the wombat 125 kickst
Posted: Sat Aug 09, 2014 5:31 pm
by rlkarren
I've got a useless frame. I'd be happy to cut the welds or I could cut the frame a couple inches above and below and send it to you. It might take me a couple days to do it though. If interested, send me an address in a private message
Roger
btw... to those who are horrified that I would cut the frame... trust me, it's truly useless...