Page 1 of 1
Home Made Tools
Posted: Wed May 07, 2014 3:58 am
by DGardner
After pulling my shift cover apart and trying to get all the shims and the shift arm back in and lined up for the pin...I came up with this home made 10mm bullet tool to line all the parts up. DG
Re: Home Made Tools
Posted: Wed May 07, 2014 7:58 am
by dcooke007
That is a great idea. Useful and simple. Off to make my own. Thanks for sharing.
Danny Cooke
Re: Home Made Tools
Posted: Wed May 07, 2014 12:05 pm
by michael_perrett
Like that. Will make one on the lathe for the Research and Meditation Center
Mike Perrett