Page 1 of 1

Plastic Rear Fender

Posted: Sun Oct 04, 2020 2:39 am
by Dal Aymond
I will be racing my Combat Wombat in Vintage Cross Country. I don't want to beat up my stock rear fender. Are there any aftermarket plastic fenders that will work, with minimum modification. I have a new Preston Petty rear fender, which is very nice, but it is too big. Thanks for any input.

Re: Plastic Rear Fender

Posted: Sun Oct 04, 2020 4:00 am
by matt glascock
To fit a PP (or any other aftermarket fender) you have to notch the front/left corner of the fender to get it to fit.

Re: Plastic Rear Fender

Posted: Sun Oct 04, 2020 4:25 am
by olddogs
Check out some of the front fenders for smaller Japanese bikes like the 60 and 80 cc models. They are thinner. I think I modified one by trimming it or mounting it backwards. It looked pretty good and did not curl around and down as far as the original. Gave the bike a modern sleeker look.

Re: Plastic Rear Fender

Posted: Tue Oct 06, 2020 1:35 am
by socalhodaka
D13A16E2-5C95-44C1-923B-F53346481E40.jpeg
E7A35457-71D2-4CAC-92C7-33CFBC383F73.jpeg
C97A4496-EF8F-4647-9999-86409EEE1047.jpeg
I have a brand new set of silver UFO vintage universal. $125 plus shipping.

Re: Plastic Rear Fender

Posted: Tue Oct 06, 2020 6:43 am
by Dal Aymond
Thank you, socalhodaka. Those are nice. But, I got in too big of a hurry and have already ordered a universal set elsewhere. But, I will keep you in mind, for my next project.