Page 1 of 1
clutch blue printing
Posted: Tue Apr 28, 2020 8:11 am
by tboone
Greetings
Can anyone tell me where I can find the instructions for blueprinting clutches?
Thanks
Tom
Re: clutch blue printing
Posted: Tue Apr 28, 2020 8:53 am
by socalhodaka
Volume 1 Issue4 of the Resonator. If you are a club member.
Re: clutch blue printing
Posted: Tue Apr 28, 2020 11:31 am
by Al Harpster
Socalhodaka's suggestion is best. You're not going to get a better value than joining & getting access to the Resonator articles.
That, or get the Hodaka Workshop Manual.
Best bet, do both. If you're opening up one of these things you're going to want the whole package of info.
Re: clutch blue printing
Posted: Tue Apr 28, 2020 5:12 pm
by viclioce
I read it. It’s not hard to do. Before you start, get yourself some small files. I bought a set of 10 small files at Harbor Freight which worked really well!
Victor
Re: clutch blue printing
Posted: Thu Apr 30, 2020 6:54 am
by tboone
Greetings all
Thanks for the advice and kudos to Ed for writing such a concise and helpful article. His tip about using a file comb is spot on.
Tom