Page 1 of 1

Alsport/Steen Forks and Shocks - parts wanted

Posted: Tue Mar 26, 2019 12:53 pm
by KCHodaka
I have one that I'm restoring (or attempting to) - I read where these are in essence a Hodaka Ace 100 - engine/frame etc, different tanks, fenders, exhaust along with suspension. Ceriani front forks - which leads me to my next question - where in the world can I find a rebuild for these, springs, seals etc.

Also, regarding the rear shocks, are they the same at the Hodaka stock - or something otherwise - I've read a few posts here and there with mixed information - some seem to sound like another aftermarket item back in the day - some said they're the same as factory Hodaka's.

Is there anyone out there that has a good knowledge base of these Alsport/Steen bikes - what are the REAL differences between the Model 92 Ace 100 - and these add ons? My goal is really take this back to 'as was', and as a nice clean rider, but not a perfect restoration.

Any advise, direction is appreciated - especially any parts - I REALLY need a throttle assembly and an exhaust - both were missing when I purchased.

Re: Alsport/Steen Forks and Shocks - parts wanted

Posted: Tue Mar 26, 2019 2:09 pm
by thrownchain
Not sure about the forks, I used Northern Hydraulics mini bike shocks on mine.

Re: Alsport/Steen Forks and Shocks - parts wanted

Posted: Tue Mar 26, 2019 3:57 pm
by Bruce Young
Terry Larson of Hodaka-parts INC in Missouri has built a lot of these, and has some parts and pieces as well contact him at [email protected] good guy.

Re: Alsport/Steen Forks and Shocks - parts wanted

Posted: Tue Mar 26, 2019 5:20 pm
by dirtsquirt74
I just finished my 1971 Hodaka Steen. It came with Cerini fork tubes and I am using them. I ended up using a model 96 exhaust. I must say that it rides much rougher than any of my other Hodaka motorcycles. I attribute it to the light weight forks and shocks. Built it for my youngest granddaughter. Will be interested to hear her opinion when the time comes.

Richard

Re: Alsport/Steen Forks and Shocks - parts wanted

Posted: Wed Mar 27, 2019 2:24 pm
by KCHodaka
Thanks for the posts - will get on it. Question - anyone know what this exhaust is - seems similar to the Steen 100 - with the chrome guard on it - and seems to be missing the larger, lower one - seller doesn't seem to know either - I'm trying to crap shoot and exhaust for my Alsport/Steen.

https://www.ebay.com/itm/VINTAGE-HODAKA ... ctupt=true

Thanks!

Re: Alsport/Steen Forks and Shocks - parts wanted

Posted: Wed Mar 27, 2019 2:33 pm
by taber hodaka
Some exhausts on ebay under Steens Hodaka now?? ------------------Clarence

Re: Alsport/Steen Forks and Shocks - parts wanted

Posted: Wed Mar 27, 2019 2:41 pm
by KCHodaka
https://ebay.to/2OuuaKv

link didn't work can search by item number 273705608520 - it is a Torque Eng pipe - or pipe spark arrestor - part number TQ2000

Re: Alsport/Steen Forks and Shocks - parts wanted

Posted: Wed Mar 27, 2019 4:04 pm
by taber hodaka
that is not what I looked at I went to ebay once there I typed in steens hodaka a list of parts came up and it included about 3 pipes. I did not type in any hhtp//\\ ect. -------------Clarence

Re: Alsport/Steen Forks and Shocks - parts wanted

Posted: Thu Mar 28, 2019 10:28 am
by viclioce
Clarence. http is an abbreviation for hyper text transfer protocol. With most newer web browsers you aren’t required to type it in any more. Just us Old IT guys use it out of habit! LOL!!! :ugeek: Victor