Page 1 of 1
16” Steen Alsport Wheels & Tires Needed
Posted: Fri Jun 08, 2018 12:23 am
by danshale
Does anyone have 16” wheels and tires for a Hodaka motored project bike? Thx
Re: 16” Steen Alsport Wheels & Tires Needed
Posted: Fri Jun 08, 2018 6:00 am
by thrownchain
Try Terry at :Hodaka-parts.com
Re: 16” Steen Alsport Wheels & Tires Needed
Posted: Fri Jun 08, 2018 6:16 am
by dirty_rat
If you are looking for the entire wheel assembly, check the Hodaka suppliers and E-bay. If you just need replacement rims (the rims usually rust out while the rest of the wheel is still usable), you can get Honda rims that are the same size. The Honda part number is: 42701-KN4-013. As for tires, all you need are 2.50 or 3.00x16 tires, which should be available at many sources.
Re: 16” Steen Alsport Wheels & Tires Needed
Posted: Sat Jul 07, 2018 5:19 pm
by danshale
Well still on the hunt. Nothing turned up at Hodaka Days. Some rollers on the net but don’t want to be stuck flipping a non-roller frame project. Either a good F/B set or rear assembly is greatest need if anyone has one. Thx
Re: 16” Steen Alsport Wheels & Tires Needed
Posted: Sat Jul 07, 2018 6:05 pm
by Makotosun
I left an odd 16” wheel I got in a large Hodaka parts buy with Bruce at HodakaParts Idaho when I was at Hodaka Days. It was actually an aluminum rim.
Contact him about the wheel he got from Gary.
Re: 16” Steen Alsport Wheels & Tires Needed
Posted: Sun Jul 08, 2018 12:18 am
by thrownchain
I have an NOS front hub you could build a wheel with.
Re: 16” Steen Alsport Wheels & Tires Needed
Posted: Sun Jul 08, 2018 3:35 am
by Bruce Young
Found some wheels for Danial, and am in conversation as I type this. Stay tuned, should all go. Bruce Young Hodakapartsidaho.com
Re: 16” Steen Alsport Wheels & Tires Needed
Posted: Wed Jul 11, 2018 3:33 pm
by danshale
Thank you Bruce at Hodaka Parts Idaho for shipping rims. We’re good to go w/ other parts sourced. Thx