Forum Changes Explained!

The main Page for the Hodaka Club Discussion Group
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Forum Changes Explained!

Post by Makotosun »

Good Morning, Hodakans!

You may notice that the forum is looking slightly different than in the past. It is all part of the transition of the forum from Strictly Hodaka to the Club management! Exciting times for the club! A HUGE thank you goes out to Paul Stannard for his willingness to let the club assume ownership and management of this great community asset.
forumheader1.png
Dale Dvorak and Myself (Gary Bashor) are currently handling most of the administrative duties, and we are looking at adding some features, as well as modernizing the look and feel just a bit. If you see something you Hate, let us know. Better yet, if you see something you really LIKE, that's even better :D

If you have suggestions for the forum or the club website (http://www.hodakaclub.org) drop us a comment in this thread or send us a note so we can see what can be done!

Subscribe to this thread for updates as we move forward!

Makotosun
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Forum Changes Explained!

Post by hodakamax »

Thanks Gary and Dale! We appreciate your efforts!

Max
User avatar
ossa95d
Posts: 386
Joined: Fri Jul 19, 2013 3:06 pm
Location: Manchester Vermont

Re: Forum Changes Explained!

Post by ossa95d »

Hahaha we are old guys riding half century old bikes...we don't like change! :lol:
Ivan AKA "Pop"
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Forum Changes Explained!

Post by Makotosun »

Not trying to upset the apple cart ;)
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
MWL
Posts: 105
Joined: Mon Oct 14, 2013 1:00 pm

Re: Forum Changes Explained!

Post by MWL »

Would it be possible to have a link to Hodaka Classifieds from here. It would increase the traffic there and would be a great resource for buying and selling parts.
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Forum Changes Explained!

Post by Makotosun »

That absolutely can be done.
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
Bill2001
Posts: 952
Joined: Thu Mar 10, 2016 1:48 am
Location: Backwoods Alabama

Re: Forum Changes Explained!

Post by Bill2001 »

Yay! First thing I noticed was "different color"...

Looks good.
Keepin' the Shiny Side up
on a '72 Wombat 94

--Bill
Al Harpster
Posts: 308
Joined: Fri Apr 11, 2014 9:13 am

Re: Forum Changes Explained!

Post by Al Harpster »

I've tried the Hodaka classifieds.

My suggestion would be to SUBSTANTIALY simplify the process of posting or offering items.

I don't want to short circuit any of the existing parts suppliers. I've used them all.

I do have some pretty nice parts I don't need and would like them to benefit other owners. I don't want to use eBay. And I'd like to clean out the basement shelf they're taking up.

I found Hodaka Classifieds to be a complex crash master that takes your time and then provides an error message & fails to post.

Please simplify and trouble shoot this tool before linking it.
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Forum Changes Explained!

Post by Makotosun »

Got it. If there is interest in the HD Classified sit to continue, albeit in a more simplified (and stable) form, I'll get that on the to do list.

I had very little interest really expressed after doing a fair amount of work on it, but would love to see it grow. Been neglecting it as of late.

Thank you for the feedback!
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
MWL
Posts: 105
Joined: Mon Oct 14, 2013 1:00 pm

Re: Forum Changes Explained!

Post by MWL »

Wow, I haven't used the classifieds lately but it worked fine when I did use it. Just lucky I guess.
Bill2001
Posts: 952
Joined: Thu Mar 10, 2016 1:48 am
Location: Backwoods Alabama

Re: Forum Changes Explained!

Post by Bill2001 »

The original Classifieds under SH was for complete bikes only and no loose parts. Is the sale of parts now allowed by the new management?
Keepin' the Shiny Side up
on a '72 Wombat 94

--Bill
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Forum Changes Explained!

Post by Bullfrog »

That topic is under discussion.
Ed (Hodaka Club President)
Keep the rubber side down!
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Forum Changes Explained!

Post by Bullfrog »

PS: I probably should have mentioned that I am firmly of the opinion that this Forum is the best Hodaka discussion group on the planet. As such, I want to be sure we take "measured steps" as the transition progresses. I sure don't want any un-intended consequences to jump up and bite us.
Ed :geek:
Keep the rubber side down!
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Forum Changes Explained!

Post by Makotosun »

I can tell you the current web team on this project intend to merely sweep the place up add a few bits of paint here and there (look & feel) update software to maintain member security and control spam, and assure the forum is maintained for the future!

We have a number of ideas to make it a bit more inviting, but like Denny's, the food won't really change!

Hodaka Classified was a proof of concept and its future design and implementation may be part of the club or it may remain a separate entity for members.

We have a lot of what we think are neat ideas, but we would love to hear your suggestions. This is a COMMUNITY forum, by and for Hodaka Owners.

Please be patient with us, as there will be some periods the site will need to be put into maintenance mode for needed work, and if that happens, we will try to post warnings and progress updates on the Hodaka related Facebook pages and groups.

Makotosun
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
racerclam
Posts: 588
Joined: Wed Nov 20, 2013 7:01 am

Re: Forum Changes Explained!

Post by racerclam »

Ok Gary now I know why we didn't see you in beaver today. Good turnout 17 riders I believe. Lots of Yamahas and one Yamadaka. Some of us rode more than 120 miles . The picture with the snow , we were at about 11,000' It was quite cold

Rich
Attachments
IMG_0900.JPG
IMG_0894.JPG
IMG_0905.JPG
IMG_0895.JPG
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Forum Changes Explained!

Post by Makotosun »

I wish I were there. Messed up my shoulder two weeks ago. Still too sore. Needed a diversion so been working on this!
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
taber hodaka
Posts: 2240
Joined: Mon Jul 29, 2013 6:34 pm

Re: Forum Changes Explained!

Post by taber hodaka »

you are sure doing a good job! Where is Longview? -----------Clarence Taber, Montana
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Forum Changes Explained!

Post by Makotosun »

Longview is in SW Washington about 45 min. North of Portland, OR
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
racerclam
Posts: 588
Joined: Wed Nov 20, 2013 7:01 am

Re: Forum Changes Explained!

Post by racerclam »

Gary , sorry about your shoulder . Get better.

Rich
Bruce Young
Posts: 493
Joined: Wed Jul 24, 2013 6:48 am

Re: Forum Changes Explained!

Post by Bruce Young »

Great News, this is exciting and we are all out here in the Hodaka World looking forward to see and use the new items you and your helpers are cooking up for us. Thanks again, Gary, Dale, and Roger.
Bruce Young - HodakaPartsIdaho
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Forum Changes Explained!

Post by matt glascock »

First, let me express my gratitude for all the hard work and allocation of resources required to provide us Hodakaphiles with this excellent forum. It is, as far as I can tell, unprecedented to be able to have real expertise (not to mention the input of original designers and racers of Hodaka Motorcycles) brought to bear on the questions and concerns forwarded by those of us interested and preserving and racing these incredibly cool machines. This fact is not lost on me and I do really appreciate it in so many ways. I'm almost embarrassed to mention what amounts to a really trivial gripe. Previously, when hovering the cursor over thread heading, a message would magically appear if there were or were not unread posts within the thread. This feature seems to be deactivated insofar as all threads display the "no unread posts" message. I always liked this feature and would like to see its return if possible. If not, no biggie. Finally, I believe we all owe a significant debt of gratitude to Paul Stannard and Strictly Hodaka for first launching and hosting this forum and more recently, demonstrating the largesse to turn it over to The Hodaka Club for our ongoing pleasure and educational benefit. Kudos to you, Brother!
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Forum Changes Explained!

Post by Makotosun »

Thanks for the heads up Matt! I will look and see if that is a template setting we have inadvertently changed, or if it is something else. Please note the forum may go through a few changes as we update and fix a few things.

We appreciate the feedback and will see if we can re-enable that feature! Once we do the updates, we may need to modify the template to the newest software. (Keeping things up to date = better security for your personal information, and improved spam protection.

Gary
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Forum Changes Explained!

Post by matt glascock »

Thank you so much. I'd be interested in hearing from others about this matter. I'm wondering if it is an issue related to a recent change in our household's internet provider.
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Forum Changes Explained!

Post by Makotosun »

If you click on the “quick links”on the top section, you will get the pictured drop down menu, and “unread posts is an option which will then display all threads that have new posts since you looked at the thread.

The other option, which will be a smaller result is just “New posts”which will display only threads that have had activity since you last visited.

Those choices may help get you the same result, but I will look into the issue as well!
383CEF85-00B4-4CBF-B9F4-C7E88DE73A21.jpeg
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Forum Changes Explained!

Post by matt glascock »

Hey, that's an awesome feature! Thanks Gary!!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest