Page 1 of 1
Keeping busy
Posted: Tue Jul 18, 2017 5:00 pm
by socalhodaka
Not me
Greg and Diane, back from the burnisher
Re: Keeping busy
Posted: Wed Jul 19, 2017 4:26 am
by Hydraulic Jack
Now we know who to call if we need cases....
Re: Keeping busy
Posted: Wed Jul 19, 2017 4:31 am
by viclioce
Wow!
Victor
Re: Keeping busy
Posted: Wed Jul 19, 2017 12:33 pm
by RichardMott
Do you have a nice set on Ace 100 cases?
Re: Keeping busy
Posted: Wed Jul 19, 2017 4:09 pm
by viclioce
Rick. You need a set? I bought what was supposed to be RT cases from eBay & they were identified as such, since they came out of an RT frame. But alas, when they arrived, they were Ace cases including the cylinder bolts. You need a set? I can send them to you! They refunded my money & told me to keep them! You can have them for postage.
Victor
Re: Keeping busy
Posted: Wed Jul 19, 2017 11:58 pm
by RichardMott
Ok, as long as the cases are undamaged, same as before. Let me know the postage and I will PayPal the money.
Re: Keeping busy
Posted: Thu Jul 20, 2017 7:23 am
by viclioce
OK. But I just want to post a few pics for you first before you say 100% yes. Let me know if there's anything specific you want to see. They are sitting under my work bench, just dry fit together with no screws, so I can show you inside & out. Let me know what you want to see specifically & I will take pics!
Victor
Re: Keeping busy
Posted: Thu Jul 20, 2017 7:48 am
by viclioce
Here's the case halves! If you are OK with them I'll send them to you. Look at them and let me know. So now you see what they are.
Victor
Re: Keeping busy
Posted: Thu Jul 20, 2017 11:53 am
by RichardMott
Victor,
They appear to be relatively undamaged. Tell me the postage and I will send via PayPal.
Re: Keeping busy
Posted: Mon Jul 24, 2017 12:18 pm
by viclioce
On their way!! PO says you'll receive on Wednesday!
Victor