Page 1 of 1
Wrong wrist pin? 94
Posted: Wed Sep 11, 2013 1:01 pm
by Forrest
I was ready to start installing the top end and put the ART/Hodaka piston on, and I'm wondering if the wrist pin is correct. 2 photos, one shows it flush up against the clip and on the other side a gap 3/16ths or so, is the right?
Thanks again for the help.
-Forrest
Re: Wrong wrist pin? 94
Posted: Wed Sep 11, 2013 1:35 pm
by BrianZ
Looks correct to me. There is always plenty of clearance at the ends of the pin.
Brian
Re: Wrong wrist pin? 94
Posted: Wed Sep 11, 2013 2:26 pm
by thrownchain
I've seen and installed both with no ill effects. Make sure the clip is well seated and you shouldnt have any issues.
Re: Wrong wrist pin? 94
Posted: Wed Sep 11, 2013 3:11 pm
by Forrest
Thanks Brian and throw chain, much appreciated.
-Forrest