The Hodaka Club Forum

Can somebody recommend a place that does ball burnishing that makes side cases look so nice? I would like to send some cases and hubs to get "burnished". At Hodaka days this past summer I saw some cases that had been ball burnished and they really looked great. I have about 5 Hodakas I am restoring and I would like to get this done for some.

I might just try and find a vibratory tumbler and do it myself. I have a small tumbler that I use to clean small parts prior to having them zinc plated but it is just not quite big enough for engine cases and or hubs.
Maybe I can find a used one on ebay or maybe Harbor freight has something I could use.

Here is the place California Hodaka and pretty sure Lee Fabry uses. Here is the cases from the Steen project I did with the help of California Hodaka. The case were stripped of all bearings, cleaned and bead blasted. Then Greg puts screws in all the holes. I know now that they live in Arizona they ship there parts to the place.
You can probably contact Greg and Diane if you have questions. PM me if you want the number. http://www.manufacturersserviceinc.com/sitemap.html

Yes, screws and plugs in everything you can.
Those beads get in all kinds of places.

Wonderful! Thanks for the info on where to get ball burnishing done. That really is a nice way to put a nice refinish on cases

Just bringing this to the top after a search for this. This looks to be the way to go on a rebuild! Maxie