The Hodaka Club Forum

Posted: **Tue Aug 23, 2016 3:39 am**

Can someone tell me what the carb measurements are for a 1976 Toad?

Engine side mm I.D.
Airbox side mm O.D.

Thanks

Posted: **Tue Aug 23, 2016 4:27 am**

THe ID should be 26mm near the slide and you will probably find that it tapers as it goes out at the end to a bit bigger. the big end is 44mm

Rich

Posted: **Tue Aug 23, 2016 5:00 am**

Big end is 44mm but on the engine side the Inside diameter is 27mm ????

Posted: **Tue Aug 23, 2016 1:01 pm**

Ok good...just checking before I sell it

Posted: **Wed Aug 24, 2016 3:25 am**

I may want that Road Toad Carb if you plan to sell it. You can email me at [email protected] & let me know if & when. ; D Victor

Posted: **Wed Aug 24, 2016 5:00 am**

Victor I sent you an email. Did you get it?

Posted: **Thu Aug 25, 2016 5:35 am**

No Ed, I did not. - Victor

Posted: **Sun Aug 28, 2016 6:44 am**

!!!!! Victor

Posted: **Sun Aug 28, 2016 6:47 am**

I'm guessing the laughing faces indicate that you got the email from "bullfrog" (i.e. not me) and not from "bullfrog" (i.e. me)

Ed

Posted: **Sun Aug 28, 2016 6:49 am**

Nope. It means I got this RT carb from John!!! Not a laughing face, a green Road Toad happy, smiling face!!!

Posted: **Sun Aug 28, 2016 10:22 am**

Ah good. (dang auto-correct! bulfrog does not equal bullfrog)
Ed

(02) 1976 Road Toad carb