Page 1 of 1
Pot metal petcocks
Posted: Mon Aug 22, 2016 5:37 am
by Natelampa
How do these go together? Got a bag of em all disassembled. Can anybody help me out?
Re: Pot metal petcocks
Posted: Mon Aug 22, 2016 7:26 am
by racerclam
You first need the tapered nylon piece that goes in the casting first , that's the valve. Then followed by the spring and the lever with a new and lubed up o ring and then held in with the screw on the side .
Rich
Re: Pot metal petcocks
Posted: Mon Aug 22, 2016 9:06 am
by Bruce Young
There was a post in the Hodaka Club Resonator, several years ago, I can send you a copy of that info if you will phone me, with you ship to info. Bruce Young 1--208--571--2823
Re: Pot metal petcocks
Posted: Mon Aug 22, 2016 2:14 pm
by Bill2001
Resonator:
Petcock Resurrection. Rich Gagnon
Vol 2. Iss11. Pg 6.
The new replacement petcocks are made differently, this is for the older ones.