The Hodaka Club Forum

I'm almost done with the first RT. I'm going to need a seat for the second one. I have an Ace seat, very good shape which I could trade, or a seat pan that's about 7 out of 10. If anyone knows or has one please let me know. Trying to keep costs down because this one is going to my nephew. I'm going to be at least $500 into it for him & that's before I do the engine rebuild. Also need an exhaust for it. I just got a great deal on wheels & axles with all the brake parts and a set of perches/levers with a throttle for $175 and Danny is sending me a cylinder as well do I can complete the motor. This one is going to be an off road bike only. No lights or significant wire harness needed this time! ; D Victor

I suppose you could look for a seat from an old CR125 or some other vintage MX bike.

I have a couple seats that will work. Seat foam is usable with some filler/repair.

One has a large lip in the rear, and the other has a shorter lip. I'm not sure which belongs to a Road Toad. Are you going to HD16?

Roger

The Road Toad needs the longer mounting tabs in the rear. Needed to clear the rear fender.

Thanks but I found a Diet Squirt seat today in eBay. Same seat as the Road Toad. Got it for $50 shipped. Now I need an exhaust. There's one on eBay for $99 shipped & im watching it. ; D Victor

Use seat bought for $29.95. ; ) Victor