Looking for Model 94/A crank case

[Simonkav]

Hey everyone,
Catastrophic engine failure here - both case halves are toast. Metal sheared and jammed between the crank and the case, cracked the cases. Damage was done quick . On the hunt for cases to rebuild the motor with. I don't see them available on hodaka-parts. I have an email into Terry, will try calling next week. Message me if you have a lead on any!

1972 Model 94a Wombat 125

Cheers,
Simon

[Roddy boy]

If u are in Canada I have a complete bottom end for you. Ran it last year and all is good to go but seals are old

[thrownchain]

Yep, where you is makes a difference.

[Simonkav]

Sorry, should have mentioned that. I’m in SF Bay Area, California.

Thanks,
Simon

[Simonkav]

I’ll also post photo of the cases. I’m assuming they cannot be repaired based on where the damage is. Welcome feedback....

[thrownchain]

Pic would be good. Almost everything can be repaired by competent people,

[Simonkav]

[Simonkav]

[thrownchain]

Ouch, tis fixable with the right guy.

[viclioce]

Simon. Where do you live? Maybe someone close by can help you. Victor

[Simonkav]

I’m in San Francisco.

Ouch is right

If anyone knows a great case repair guy, definitely not opposed to trying. I figured they were shot!

Thanks again everyone!

I did see a post from Rich (racerclam) about doing case work. Doesn’t appear to be active anymore?

[viclioce]

Here’s Rich’s website! You can contact him through there! Victor

https://richstayloredporting.com/index.html

[olddogs]

You should be able to find a right side case half pretty cheap. The left side case is often chain damaged an will be more to replace as clean undamaged ones are getting rare.

[thrownchain]

I’ll have a set shortly, right side near new but non numbered, left side with previous damage already repaired.

[Darrell]

Hodaka-Parts has new 03 cases for sale.

Are they backwards compatible with 94 internals? I think there's a mod required (oil passage drilling) to run the 03 on premix however.

[taber hodaka]

I am sure I would have a set of cases, if nobody else does I would not rebuild your cases unless they were to a 1936 henweigh. ------- Clarence

[ossa95d]

Hahaha good stuff Clarence... I'm not falling for it.

[captonzap]

Oh, come on, what's a henweigh?

[taber hodaka]

Just about 7&1/2 pounds before she lays the egg. ---------------- old joke Clarence

[Simonkav]

I am sure I would have a set of cases, if nobody else does I would not rebuild your cases unless they were to a 1936 henweigh. ------- Clarence

Appreciate the input. How might I connect with you regarding said cases? Feel free to PM or email me through the board.

Cheers,
Simon

[Simonkav]

If u are in Canada I have a complete bottom end for you. Ran it last year and all is good to go but seals are old

Just for my learning - why the Canada limitation? I’m not hip to the challenges - shipping to US outrageous or customs not cool with it or just a PITA you’d rather not deal with?

[matt glascock]

I wouldn't toss the roached cases. Some a$$-kicking aluminum fabber with a serious sand-casting jones might like to put them back into circulation. They ain't makin' any more.