Oil seal
-
- Posts: 1920
- Joined: Sun Jul 21, 2013 8:52 am
- Bullfrog
- Posts: 2784
- Joined: Mon Jul 22, 2013 4:05 pm
- Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)
Re: Oil seal
Aw c'mon, that'll buff ou . . . No. Wait. Wrong response. Duct tape'll fix that.
Ed
Ed
Keep the rubber side down!
-
- Posts: 1920
- Joined: Sun Jul 21, 2013 8:52 am
Re: Oil seal
That snapped like it was made out of Bakelite
-
- Posts: 493
- Joined: Wed Jul 24, 2013 6:48 am
Re: Oil seal
Danial, want some more just like that, Time is a Vintage bike enemy. HODAKA WORLD, TAKE NOTES, Dan is trying to point out something here. Don,t guess at it, replace it, is the quote of the day. Replace it, its cheap insurance. Bearings as well. Terry of Hodaka-parts inc has whole kits ready to go.
Bruce Young - HodakaPartsIdaho
-
- Posts: 1920
- Joined: Sun Jul 21, 2013 8:52 am
Re: Oil seal
The seals getting hard I’m used to, but this one was actually brittle, those two conditions don’t provide a good seal and can cost you a motor if you don’t take the time to change them after a long period of non use.
-
- Posts: 2520
- Joined: Thu Oct 24, 2013 5:20 pm
Re: Oil seal
Just super glue the pieces together or whatever and send it to me. I'll dress it for you with my Dremel.
Re: Oil seal
RTV Cement is King! LOLOL!!! Victor
1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
-
- Posts: 1920
- Joined: Sun Jul 21, 2013 8:52 am
Re: Oil seal
I’ll go all out, bite the bullet and get a new one. ( I own my own dremel tool)
Re: Oil seal
Can you tell me what part# that is on a 93A SUPER RAT schematic chart ?thrownchain wrote: ↑Fri Feb 05, 2021 4:42 pm I’ll go all out, bite the bullet and get a new one. ( I own my own dremel tool)
New to this engine...haven't split the cases yet and I'd like to learn ahead of time what to plan on replacing .
Thanks so much
john
Re: Oil seal
Buy the Super Rat bottom end rebuild kit from Terry Larson! Make sure you select the correct model ftom the drop down box! Victor
http://hodaka-parts.com/item.asp?cID=0&PID=6548
http://hodaka-parts.com/item.asp?cID=0&PID=6548
1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
-
- Posts: 2520
- Joined: Thu Oct 24, 2013 5:20 pm
Re: Oil seal
I'm sure you have a Dremel tool, Thrown. Please don't think I was questioning the depth of your bench. It's just that...er...when it comes to some of the more, shall we say "off-label" experience in ill-advised, yet oddly ineffective applied Dremel-ogy, I'm kinda the big dog around here. Yep.
-
- Posts: 1920
- Joined: Sun Jul 21, 2013 8:52 am
Re: Oil seal
I’ve heard that you’re the dermal guru, but I’ll walk my own path....,
Re: Oil seal
Of course, we are all joking here about repairing a seal!!! Victor
1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
-
- Posts: 2520
- Joined: Thu Oct 24, 2013 5:20 pm
Re: Oil seal
Who's joking. I just chucked up my brass wheel. Bring it!
-
- Posts: 1920
- Joined: Sun Jul 21, 2013 8:52 am
Re: Oil seal
I have an agriculture background, we fix everything we can. .....
-
- Posts: 2520
- Joined: Thu Oct 24, 2013 5:20 pm
Re: Oil seal
I have depression-era parents. Ditto.
Who is online
Users browsing this forum: No registered users and 7 guests