32mm Ceriani Front End
-
- Posts: 34
- Joined: Tue Aug 04, 2020 3:08 am
32mm Ceriani Front End
I have come in to possession of a couple of complete 32mm Ceriani Front Ends. One is from a Penton. I'd like to mount one of them on my Combat Wombat. Any advice, information, or instruction would be appreciated. Thanks.
-
- Posts: 2520
- Joined: Thu Oct 24, 2013 5:20 pm
Re: 32mm Ceriani Front End
That is an impossible fitment without destroying the entire geometry, balance, AND value of the bike so I'd give up on the idea. They are junk anyway. Don't toss 'em, though. I get 10 cents apiece for them at my metal scrapper so just send them to me and I will see to it that they are properly 'recycled'. I'm helpful that way.
-
- Posts: 34
- Joined: Tue Aug 04, 2020 3:08 am
Re: 32mm Ceriani Front End
.
Last edited by Dal Aymond on Fri Oct 16, 2020 9:04 am, edited 1 time in total.
Re: 32mm Ceriani Front End
I put 32mm Penton Ceriani forks on my Ace 100B. It was a direct bolt on. I had to make new stops to keep the forks from hitting the tank. The Penton trees are wider than the Hodakas so you need the Penton axle. I'm sure the CW would be similar.
Larry S
Larry S
-
- Posts: 34
- Joined: Tue Aug 04, 2020 3:08 am
Re: 32mm Ceriani Front End
Thank you, Larry S. I'll give it a try.
Re: 32mm Ceriani Front End
I have a Wombat frame with Cerianis on it, which I just recently acquired. I didn’t do the installation, but I can certainly provide pictures for you. Let me know! Victor
1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
Who is online
Users browsing this forum: No registered users and 5 guests