Hi guys,
Merry Christmas and happy new year to all.
Guys I’m wWondering if anyone would be able to tell me the Torque settings for the 4 head studs on the 250 thunder dog.
Thanks in advance
250 Ed torque setting
-
- Posts: 2238
- Joined: Mon Jul 29, 2013 6:34 pm
Re: 250 Ed torque setting
170 to 200 inch pounds I think?? -----------------Clarence
Re: 250 Ed torque setting
It’s also 14-16.5 foot/pounds. Just divide by 12!
1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
- Bullfrog
- Posts: 2781
- Joined: Mon Jul 22, 2013 4:05 pm
- Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)
Re: 250 Ed torque setting
More than 200 in-lbs I think. I should be in the same room as an Owners Manual some time over the weekend to check. In the meantime you might surf thru the Hodaka Parts dot com website. The torque spec may be there.
Ed
Ed
Keep the rubber side down!
- Bullfrog
- Posts: 2781
- Joined: Mon Jul 22, 2013 4:05 pm
- Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)
Re: 250 Ed torque setting
The Owner's Manual lists 200 in-lbs for the 4 cylinder head nuts and 170 in-lbs for the 4 (smaller) cylinder head bolts on the 250 ED.
Ed
Ed
Keep the rubber side down!
-
- Posts: 5
- Joined: Tue Nov 26, 2019 6:22 pm
- Location: melbourne
Re: 250 Ed torque setting
champion!! Thanks Guys. All the best for the new year!
Who is online
Users browsing this forum: No registered users and 0 guests