Looking for a VM20 carb

[viclioce]

Looking for a VM20 I can rebuild. Anyone out there have one they can part with? I can put jets in it if needed. Just need a basic body & slide that’s functional. I even have floats so those aren’t necessary! Thanks in advance! Victor

[hodakamax]

Victor, I have one that's kinda grim if you can't find a nice one. Lotsa crud on this one. Keep me posted. You are welcome to it. Maxie

[Tether]

Is this what you are looking for?
It was on an Ace 100 motor that I picked up in a parts bunch I recently acquired.

[thrownchain]

That's not it, Hodaka used a flange mount carb, that's a spigot mount.

[Tether]

Interesting, it appears that it is a Dirt Squirt 80 carb on the 100 motor No. P-19423

[bobwhitman]

Bob
Could you email me good pix of that carb and measure both (in/out) diameters? I just acquired a similar looking carb which I believe is marked xx17xx (I’m not home now so can’t confirm the markings). Mine is definitely smaller than a 20mm & is a slip fit.
Bob

[Tether]

Bob, I sent you an email

[viclioce]

Maxie! You have a PM!!! Victor