What carb is this?

[viclioce]

Paul sent me this incomplete carb. First Mikuni I’ve seen with the throttle cable not connected to the slide. What model is it and how do I release the cable? Thanks! Victor

[Bullfrog]

I'm stumped.
Ed

[viclioce]

Almost seems there’s a choke cable on this one? I can’t see how this would activate a carb slide.?.?.?

[matt glascock]

Looks like a remote choke cable.

[taber hodaka]

Wow a remote choke you won't have to bend over. ----------Clarence

[thrownchain]

That is a choke, nothing to do with the slide.

[viclioce]

It’s a 20mm I believe. But I can’t figure out how to remove the choke cable from inside. Don’t know if it’s rusted or if there is some kind of release??? Anyone? Bueller? Anyone???? Victor

[thrownchain]

Unscrew the cable housing from the carb body. After that the choke plunger is similar to the slide, should be a spring and a slot in the choke plunger. Once you disengage the cable it should pull out, or you might have to unscrew the smaller cable adjuster from the bigger housing. If I have one I'll post pics.

[viclioce]

Yes. I could unscrew the cap but it is dark and rusted inside. Can this be converted back to a manual choke? I have all the needed parts. Orfoes it stay as is?

[thrownchain]

As long as the choke housing is the same size, I don't see why you couldn't convert it.

[thrownchain]

And for those people who want to do it, if you can find the parts you can change your choke set up to be cable activated from a lever on the bars.