Black frame 69

The main Page for the Hodaka Club Discussion Group
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Black frame 69

Post by 2wheeled »

I recently was given a 1969 hodaka by a family member that has a black frame. It was stored in a barn since new. Best I can tell it has never been started. It shows 4 tenths of a mile on the odometer. it is cleaning up pretty good and seems to be all there except that the hand grips are badly split. Does anyone know where I might find an OEM set of grips ? They are gray in color and all I can find is aftermarket black ones. Thanks in advance for any help you can provide. WOW just looked at the date. Maybe a bad day to post this :lol:
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Black frame 69

Post by matt glascock »

Wow! Time capsule. How cool is that??? Could you post a picture or two? Hodaka didn't make a black framed motorcycle until 1972 so its either a Wombat, a Combat Wombat, or perhaps one of the especially painted (black) motorcycles Hodaka made to order for the - get this - Nigerian police force. Now that would really be something if you had one of those!!
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

My father in-law was a dealer back then and said ( it was one of limited number that was made for an African police department and the order was canceled and they were distributed around the us). I will post a pic when I get it cleaned up.
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Black frame 69

Post by matt glascock »

Wow!!!! Can't wait to see it. I've read about them in Ken Smith's book, but have never seen one. Amazing!!!
Bruce Young
Posts: 493
Joined: Wed Jul 24, 2013 6:48 am

Re: Black frame 69

Post by Bruce Young »

I have almost one, frame and other misc parts and pieces not a complete bike and I know Clarence Tabor of Montana sold some as well. Bruce Young
Bruce Young - HodakaPartsIdaho
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

I will attempt to attach some photo's of the bike. I am no computer wiz. One pic is a framed pic I received with the bike of mannix on a hodaka about the same time period. I was wondering if anyone had any background on it. I have not found anything on line. One of the other pics is a close up of the gas tank. It has alot of pits but not like rust pits it's more like a poor chrome job. Are others this way or did this one get rusty at some point and someone tried to clean it up ? appreciate any thoughts.
hoda4.jpg
hoda2.jpg
hod1.jpg
hoda3.jpg
Jack Elliott
Posts: 73
Joined: Tue Dec 29, 2015 11:42 pm
Location: Sydney Australia

Re: Black frame 69

Post by Jack Elliott »

I think you have got a unique bike there. something great to have inherited, a piece of Hodaka history. I cant imagine there are too many original zero miles black aces like that out there.
Probably belongs in a museum (in Athena the home of Hodakas!) you should get hold of a copy of the Hodaka book by Ken smith . That has the relevant history in it. thanks for sharing the images.
Paul Stannard
Posts: 28
Joined: Tue Jan 02, 2018 3:05 am

Re: Black frame 69

Post by Paul Stannard »

I believe I have seen your bike before. Are you located (or was the bike) in Northwest PA ??
Gorgeous bike to have as part of your collection !
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Black frame 69

Post by matt glascock »

Incredible!! The Ace is a really sharp looking bike in black and chrome. Thanks for sharing and congratulations! BTW, the OEM-style grey grips are available at our usual Hodaka parts houses and Renthal makes a darn close facsimile.
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

Yes, It spent most of it's life in northwest PA. Matt can you please send me a link to the parts house that has the OEM gray grips ? All I am finding is black. Thanks
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Black frame 69

Post by matt glascock »

Well, I have provided bogus information. I have gotten the grey OEM grips from SH but I neglected to remember that Paul has recently sold the business to Terry (owner of HPI). That means that until this transaction is completed and the parts are inventoried, I'm not sure when they will be available. Hodaka Parts Inc has the grey Renthal grips available but I imaging with your insanely cool bike, you'll want OEM. In the meantime, I will check my parts stash and get back to you.
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

All good. I appreciate you taking the time to look into it for me. Yes, I was really hoping to find OEM if possible. Any thoughts on the mannix pic or the tank pits ?
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Black frame 69

Post by matt glascock »

Use Semichrome polish (Competition Chemicals) on the tank. The stuff is just shy of magical for these tanks and has the added benefit of leaving behind a protective yet invisible film. Great stuff. Many Harley shops sell it and it is readily available on Amazon. You might consider Contacting Hodaka Parts Inc. or Hodaka Parts Idaho directly regarding OEM grips. For a bike that cool, I'd bet they would go above and beyond to get you the grips. Also, Hodaka Dave Rozier (Hodaka Dave's Vintage Service) has an extensive parts selection and is a remarkably great guy. If he can help you, he will. I will check through my stash sometime this weekend.
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

I've been riding Harley's for 39 years so I am familiar with semichrome. I will give it a try. thanks for all the great info I will contact them direct. I already e-mailed Dave Rozier. Waiting for a response. If your ever in eastern North Carolina I ow ya cold one or three. Thanks again.
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Black frame 69

Post by matt glascock »

I'd love to take you up on that offer! Ditto if you are ever up in this neck of the woods (Northeast Iowa). I will check for those grips.
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

while doing some cleaning besides needing new grips some how managed to end up with two different mirrors. Bruce from hodakaparts.com was able to help me determine that the right hand mirror is not original. If anyone comes across a pair of gray grips or a right hand mirror please let me know I would really appreciate it.
Last edited by 2wheeled on Mon Jul 16, 2018 11:43 pm, edited 1 time in total.
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

I Just looked at the Mannix photo I posted and that bike only has one mirror on the left side. I had never noticed that before. :shock: I guess I don't need a mirror after all. I am learning alot here.
User avatar
socalhodaka
Posts: 927
Joined: Fri Jul 19, 2013 10:31 am

Re: Black frame 69

Post by socalhodaka »

F79154AE-4843-4EB0-B292-41A269F64FF4.jpeg
0E4A2F35-349D-4E60-ADFE-E3C3DD59C5CD.jpeg
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

If you just had a pair of grips not attached to a bike.
Larry S
Posts: 192
Joined: Mon Aug 26, 2013 5:47 am
Location: Lodi Ca.

Re: Black frame 69

Post by Larry S »

I like the Rokon in the background.I have one just like it except mine is Hodaka powered.
Larry S
rlkarren
Posts: 388
Joined: Tue Jul 23, 2013 6:50 am
Location: River Heights, Utah

Re: Black frame 69

Post by rlkarren »

If it’s an original mirror they can be used on either side. So there really not a left or right mirror, just a mirror.

$0.02

Roger
2wheeled
Posts: 11
Joined: Fri Jul 13, 2018 4:39 am

Re: Black frame 69

Post by 2wheeled »

appreciate the $.02 . I'm kinda slow but I managed to figure that out before someone talked me into buying two Ti-knockoffs. Live and learn.
Bruce Young
Posts: 493
Joined: Wed Jul 24, 2013 6:48 am

Re: Black frame 69

Post by Bruce Young »

I am beginning to my Nigerian bike together, If my bike has frame number A-36644, and so few where produced aprox 200, what is their frame numbers, starting point and ending point, if you have a orginal black bike from the Nigerian group what is the frame number of the bike you have. Please send info in and I will start a list of them to put on this site and my web site, Bruce Young e-mail; [email protected] Thanks
Bruce Young - HodakaPartsIdaho
taber hodaka
Posts: 2240
Joined: Mon Jul 29, 2013 6:34 pm

Re: Black frame 69

Post by taber hodaka »

Bruce to my memory they produced about 1,000?? my receipt shows I sold one with frame number 39338 and I will have to look at the other one. I thought the majority were sold out of state. ------------Clarence
Last edited by taber hodaka on Fri Jul 12, 2019 4:51 pm, edited 1 time in total.
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Black frame 69

Post by Bullfrog »

I don't have my Hodaka Book to turn to right now, but I thought it was 100 or 200 bikes produced for Nigeria.
Ed
Keep the rubber side down!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests