question

The main Page for the Hodaka Club Discussion Group
Post Reply
givergas
Posts: 790
Joined: Sat Sep 16, 2017 11:41 am
Location: minnesota

question

Post by givergas »

hey all here's a question. when cleaned up the cylinder +7 was stamped on the top of it. ive looked thru the forums and stuff could not find the answer . have to ask the big guns, thanks
Attachments
IMG_6044.JPG
rlkarren
Posts: 388
Joined: Tue Jul 23, 2013 6:50 am
Location: River Heights, Utah

Re: question

Post by rlkarren »

Short answer is that it means absolutely nothing that is useful to us as the end users.

It was used by the original engine builder in the Hodaka factory so that they could match up pistons to cylinders. I'm sure there's more to it than that, but that's what I've come to understand.

Roger
viclioce
Posts: 4848
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: question

Post by viclioce »

Roger’s statement is accurate. All we’ve been told here is that new cylinders and pistons were coded after being spec’d out with a number. So “7” pistons went with 7 cylinders as a best match scenario. :ugeek: Victor

1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
givergas
Posts: 790
Joined: Sat Sep 16, 2017 11:41 am
Location: minnesota

Re: question

Post by givergas »

thanks gentleman. one more thing to learn and one more thing not to think about..
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests