Etiquette on the Forum

The main Page for the Hodaka Club Discussion Group
Post Reply
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Etiquette on the Forum

Post by hodakamax »

I do spend some time on the Forum as a contributor and consumer I suppose. I actually put quite a bit of time in what I write and photograph for our Forum. The Forum is a great social medium and many members have become friends of mine and I hope theirs. I see the Forum as a fun and humorous outlet for me and my amateur writings. It's a place I can share projects of mine and others can do likewise. It's a place to help others with advice if you can and receive it if needed. This is and should be what Forums are about.

Forums at least in my opinion are not for criticizing or putting down people and their ideas and work. Forums are not to advertise how smart someone thinks they are. Posts are the creators input and not a place to rudely intervene and challenge. Posts are for discussions not attempted put downs and questionable advice. Mis-quotes are definitely out. Bad attitudes and predictions of failure not needed.

I presently have a post on a project that is enjoyable for me to show and discuss with others. Members have great usable input and ideas along with our usual chat on life as Forums should be. All fun.

On with the story. I have a member participant who wants me to build my project his way and almost always negative on any accomplishments done and always mentioning his credentials and accomplishments. A subtle warning and one not so subtle was given mentioning that this was my post and not his and to keep it positive.

This is not a complaint but an observation and something that will not continue on my posts and watch. I do not have to defend my posts, me or my work. I can take care of myself but it's not what our Forum should be or become.

Max
JackM
Posts: 170
Joined: Sun Mar 05, 2017 4:34 am
Location: Western MD

Re: Etiquette on the Forum

Post by JackM »

Hear, hear.
Joe Ormonde
Posts: 357
Joined: Sat Oct 07, 2017 4:26 pm

Re: Etiquette on the Forum

Post by Joe Ormonde »

Any Laurel and Hardy fans out there? One of their films is called Towed in a Hole. Watch it! I hate to admit that a few of my projects remind me of this film. They buy a boat so they can catch their own fish and it turns into a mess! So, concerning any ones project to quote Oliver Hardy: ( I have nothing to say!) Joe Ormonde.
efkruger
Posts: 307
Joined: Wed Jul 06, 2016 4:08 pm

Re: Etiquette on the Forum

Post by efkruger »

I have years ago learned to always treat others with respect and treat them how I would want to be treated. That is the Golden Rule of life. I learned years ago being nice and polite will get you much more than being mean spirited, arrogant and rude. I did not ever put anyone down. When I was the supervisor of the tooling shop at Reynolds International in McAllen, Texas. I everyday in the morning went up to every one of my men and shook their hand and greeted them. I did this every single day without fail. This simple act of kindness and respect made all the difference in the world. My men would bend over backwards to help me get done what I needed to. I got done more with only four men than the previous very negative supervisor did with eleven men and an assistant.
In my youth I also learned not to let negativity influence me. I learned when working for a very demanding boss not to gripe when he gave me a hard assignment but rather to use my energy to solve the task at hand rather to gripe and complain about it. Keeping a positive attitude will help you to solve whatever problem you have. Keeping a positive attitude and treating others with respect is essential with succeeding in life. God Bless everyone here on this Forum. Merry Christmas!
Joe Ormonde
Posts: 357
Joined: Sat Oct 07, 2017 4:26 pm

Re: Etiquette on the Forum

Post by Joe Ormonde »

Also remember (You catch more flies with sugar than vinegar) Joe Ormonde.
User avatar
Dale
Posts: 1272
Joined: Fri Jul 19, 2013 7:23 am

Re: Etiquette on the Forum

Post by Dale »

Max,
Those that have the patience to document and share their projects are appreciated. It certainly helps those of us that lack the experience in all things "Hodaka". Keep up the good work and Merry Christmas to all.
Dale
Dale
Bill2001
Posts: 952
Joined: Thu Mar 10, 2016 1:48 am
Location: Backwoods Alabama

Re: Etiquette on the Forum

Post by Bill2001 »

Good post, Max. I'm in total agreement.
Keepin' the Shiny Side up
on a '72 Wombat 94

--Bill
User avatar
socalhodaka
Posts: 927
Joined: Fri Jul 19, 2013 10:31 am

Re: Etiquette on the Forum

Post by socalhodaka »

I think you should be required to have a photo in all your post, because they are so good. Thank for all the time you take to share your projects.
thrownchain
Posts: 1920
Joined: Sun Jul 21, 2013 8:52 am

Re: Etiquette on the Forum

Post by thrownchain »

People who take the time to take pics and document their builds should be thanked for the effort and the info shared. In most instances there are questions answered that weren't asked yet and ideas forwarded that may have not been considered before. Anyone should be encouraged to build their bike their way as it's a learning experience and the lessons gained are more than worth it. It is a good feeling to be able to say " I built it myself". And if others appreciate the efforts all the better.
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Etiquette on the Forum

Post by Makotosun »

If someone posts something that is offensive, or otherwise objectionable, please advise one or more of the moderators. As we move to the new software that function will remain available.

There will always be those who believe there is only one way to skin a cat, (or build a Rat!), and will weigh in with their opinions. My philosophy is that everyone builds their own project. Unless I see a safety issue, or maybe have personal bad experience with a build direction, to each their own. Unless I am am buying it, how it is built is really none of my business! Hopefully others feel the same way about my heretical creations!

We hope to have this forum be the centerpiece of the new site so we all want it to continue to be the go to place for Hodakans.

Live long and prosper . . .
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
viclioce
Posts: 4848
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: Etiquette on the Forum

Post by viclioce »

No Good Story ever started with a Salad . . .

Sometimes it’s just a fruit salad! LOL!
Can members currently delete a post on a thread they started? Might be something useful. I know I would have used it a few times were it available. :ugeek: Victor

1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Etiquette on the Forum

Post by Makotosun »

Users should be able to edit their own posts.
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
Bill2001
Posts: 952
Joined: Thu Mar 10, 2016 1:48 am
Location: Backwoods Alabama

Re: Etiquette on the Forum

Post by Bill2001 »

Victor-- at the top of the posts are three buttons: Quote. Report. Edit.
No delete as such, but you can edit down to a period.

Edit-- oh wait, I see an "x" button on new posts, so I guess they can be deleted within the first few minutes.
Keepin' the Shiny Side up
on a '72 Wombat 94

--Bill
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Etiquette on the Forum

Post by hodakamax »

Update:
Now the righteous has sent hopefully the last word to me in a demeaning Bible verse in my PM. I really need to be insulted in front of my friends rather some snide private message box and not in the name of religion. First on my post, now this? Strange indeed.

I'm not complaining about the actions of others but this seems to violate the the rules and ethics of our Forum and again will not be tolerated by me. My presence on our Forum is social and fun. I'm not here to argue or be insulted yet again or waste another minute on the actions of others at least on Our Forum.

Action to take? I'm taking mine. Just keeping the Gang posted on a potential problem I don't want to happen again to any member.

Cheers Gang and thanks for your support of me and my weird ramblings, projects and likewise humor! :)

Max
BrianZ
Posts: 493
Joined: Fri Jul 19, 2013 3:28 pm
Location: Ontario, Canada

Re: Etiquette on the Forum

Post by BrianZ »

I haven't been posting on this site as much as I used to, mostly because I am not doing as much restoration work as I used to. However; Max, I've followed your posts and appreciate the work you put into both your projects and your posts. There are occasions when I would disagree with the approaches you are taking (and I am sure you would argue with some of the approaches I have taken as well) but in the end it's your project and we all have different tastes and ideas. I have learned some things from your posts, and bottom line: Keep up the good work and ignore (insert appropriate derogatory name for the person here).

And thanks for your contributions to the Hodaka Club Resonator.

Brian
Bill2001
Posts: 952
Joined: Thu Mar 10, 2016 1:48 am
Location: Backwoods Alabama

Re: Etiquette on the Forum

Post by Bill2001 »

Sorry that you are having problems. Guess he didn't learn from his first timeout.

Best thing to do is to put him on Ignore. In your "control panel" there are buttons for friends or foes. When he is on ignore, you won't see his posts.
Keepin' the Shiny Side up
on a '72 Wombat 94

--Bill
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Etiquette on the Forum

Post by hodakamax »

Hey thanks Brian and Bill. It's really not a problem for me but for the Forum in general. I'm just bringing it to light. Hopefully the offender will finally get the message that I don't want to deal with him in any way. We have nothing in common.

I suppose most everyone notices in my writings that I rarely if ever say that this is the right way to do something. I say or infer that this is my approach to how I think I can do something. I take advice but do like to try my approach first. I can learn from failure. I am not an expert. I was a Hodaka Dealer and racer from decades ago. This is not my expertise now. This is a hobby I got back into a few years ago after 40 years of being gone. I do like to share history and how it used to be. The projects are fun, the friends are great.

I really do appreciate everyones comments. You really do help drive me on. My amateur writing career has been equal fun and even somewhat successful. I Having been a Photographer most of my life and being married to a Journalism teacher and now Graphic Designer, my writing career is moving forward and I still get to do photography. What could be better? Did I mention that my wife was an English teacher before that? I already knew that buying a camera does not make you a photographer nor buying a pencil make you a writer. You just don't become anything overnight. Her input has been phenomenal.

Well, I'm getting slightly off-track but I should put myself in perspective on what I know and what I'd like to know. Beware of experts I always say! 8-)

Max

PS--Hey Brian! Good to hear from you! We miss your fun writings in the Forum and Resonator.
JackM
Posts: 170
Joined: Sun Mar 05, 2017 4:34 am
Location: Western MD

Re: Etiquette on the Forum

Post by JackM »

Well said, Max. Keep on keepin' on.
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests