Max's New Project

The main Page for the Hodaka Club Discussion Group
Post Reply
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Max's New Project

Post by hodakamax »

Max's new project needs a name. The Day One Project was the last one and the name stuck as the bike was documented from, yes, day one to finish. It's still probably not finished but you get the idea. Some things we need to consider are: I probably sold this bike new almost 50 years ago and raced short track against it for several years. Hah, It never beat me. I found the bike at an auction yesterday and the two brothers that raced the bike are now deceased. I purchased it for $65 and it's grim. Not a practical project but I do have an old collection of Hodaka parts that would help things along. The final project is to build a road race or top-end oriented machine as in record attempt for a 100cc machine. In reality this is never going to set records or even road race but it's something I've looked at and researched for years. Maybe it's time to at least build the machine with a purpose no matter how far fetched. A goal is always good. Record attempts are all far from Kansas as the Texas Mile and salt flats. The machine will try to fill both roles but at best probably only be tested locally. 100 MPH could be a goal. After all this talk for years this could be one of those on-going and never finished projects that entertains me and makes for a good story.

I'm toying with the title line from an old song by REO Speedwagon, "It's Time for Me to Fly". It was a line I used in racing to inspire me before entering a road race course from the pits. It helped raise the hair on my neck and was also funny. How about The Time for Me to Fly Project? Maybe. Hmm, still thinking. 8-)

My wife wants to call it "The Next Last Great Hodaka Project" which does keep happening and is semi-humorus. ;)

So, there you go, ideas, help, comments, votes and remarks welcome! This could be a long story and a good title is needed to start this project!

Maxie
Attachments
The beginning of the project!
The beginning of the project!
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Max's New Project

Post by Bullfrog »

I don't think you should use the "Next Last Great Hodaka Project" name. No.

Cuz I want to reserve that name for one of my future projects. :-)
Ed
Keep the rubber side down!
viclioce
Posts: 4848
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: Max's New Project

Post by viclioce »

How about something like "Top Boar" cause it's gonna run like a squealing pig!?!?!?! :mrgreen: Victor

1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
Hydraulic Jack
Posts: 445
Joined: Wed Mar 22, 2017 1:26 pm

Re: Max's New Project

Post by Hydraulic Jack »

"Maximum Ride."
Hydraulic Jack
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Max's New Project

Post by hodakamax »

Wow! How exciting! I had forgotten how much fun restoring/refurbishing and plotting can be. I'm underway with the new project with some evaluation and starting on some key components. The GEM reed assembly cleaned up nicely and I'm about to get most of the crud off the cylinder. The low pipe is one of major parts and I'm off to the local body shop to see about pulling these dents. The pipe is sound and the dents are on the bottom. Hopefully this can be successfully repaired locally. The project is bad timing as I'm also refurbishing and painting the house and actually being quite responsible and accomplishing things. This is only one of many projects I've started since I ran out of Hodaka projects but all work and no play makes Max a dull boy. Hey, I'm semi-retired and maybe I can do some of each. I must say that motorcycle projects sure beat domestic frivolities. That's it for now, just an early report.

Maxie
Attachments
Multiple projects!
Multiple projects!
Bill2001
Posts: 952
Joined: Thu Mar 10, 2016 1:48 am
Location: Backwoods Alabama

Re: Max's New Project

Post by Bill2001 »

I've heard that much air pressure and a lot of oxycetylene heat can pop the dents out.
I wonder if an auto body paintless dent puller would work?

I like "Max's Maximum Project".
Keepin' the Shiny Side up
on a '72 Wombat 94

--Bill
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Max's New Project

Post by matt glascock »

I'd go with "Super Max". In addition to a cool title for the build report, it would make a really cool air box decal. Then you could use it as an intimidation factor at the track. Just tell people "When you see me roll up to the gate on the 'Super Max', you'll all be doin' Hard Time".
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Max's New Project

Post by hodakamax »

All good gang! Victor, yours is too Deliverance sounding, lol.
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Max's New Project

Post by hodakamax »

Hey, I might have it! Eweleen's tag for years even before I married her! The To the Max Project! Wadda ya think?

Max
Attachments
To the Max
To the Max
User avatar
ossa95d
Posts: 386
Joined: Fri Jul 19, 2013 3:06 pm
Location: Manchester Vermont

Re: Max's New Project

Post by ossa95d »

Now that's perfect!!
Ivan AKA "Pop"
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Max's New Project

Post by hodakamax »

Hey thanks Ivan! Also good to hear from you! So be it.

Max
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests