250Sleepy oil pump block off
-
Hodaka250SL
- Posts: 66
- Joined: Mon May 16, 2016 9:12 am
250Sleepy oil pump block off
What is the best way to block off the oil pump on a 250sl. Because I'm premix the gas
-
Hodaka250SL
- Posts: 66
- Joined: Mon May 16, 2016 9:12 am
Re: 250Sleepy oil pump block off
I ment 250sl my phone autocorrected
-
Hodaka250SL
- Posts: 66
- Joined: Mon May 16, 2016 9:12 am
Re: 250Sleepy oil pump block off
I ment 250sl my phone autocorrected
Re: 250Sleepy oil pump block off
I also ride a 250Sleepy...
Strictly Hodaka sells an aluminum blank, gasket, and machine screws to block off the oil pump drive from the crankcase.
As for the intake manifold oil feed, a short machine screw (with a bit of epoxy to make sure it doesn't back off) should suffice. Best to make sure the end is flush inside the manifold so that it leaves a smooth passage for the fuel mix.
Strictly Hodaka sells an aluminum blank, gasket, and machine screws to block off the oil pump drive from the crankcase.
As for the intake manifold oil feed, a short machine screw (with a bit of epoxy to make sure it doesn't back off) should suffice. Best to make sure the end is flush inside the manifold so that it leaves a smooth passage for the fuel mix.
Who is online
Users browsing this forum: No registered users and 6 guests