Wombat Cook Out

The main Page for the Hodaka Club Discussion Group
Post Reply
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Wombat Cook Out

Post by hodakamax »

The Gang has been guiding me for the cooking of the Wombat exhaust pipe to remove carbon products from within. I am reporting the operation to be successful. I did add a little science (my wife calls me Dr. Science) to the project by weighing the pipe before and after the inferno treatment. The test revealed that slightly over 1/4 pound of solids were removed during the process. Here's a few pictures showing all the fun. I'll add this to my list of Hodaka experiences! Now on to building a new lengthened header pipe.

Max :shock:
Attachments
Nova burst
Nova burst
Cooking
Cooking
Weigh-in
Weigh-in
rtboone
Posts: 149
Joined: Mon Sep 02, 2013 9:07 am

Re: Wombat Cook Out

Post by rtboone »

Greetings Max

Nice fire!

If my memory is correct, in the original "On Any Sunday", a desert racer burned out his Husky's exhaust in the middle of nowhere. Unfortunately, it was still attached to his motorcycle. This way is much better.

When you start your bike with this pipe the first time, my suggestion is that you leave the spark arrestor out to see if any amount of debris gets blown out. I did this with my 250SL, and a bunch of half burned insulation material was ejected which would have plugged the arrestor.

Tom
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

Thanks Tom, sounds like a good idea. I also tapped around on it after the fire with a small hammer and several black flakes fell out. I think I'll follow your advice.

Max
User avatar
Dale
Posts: 1272
Joined: Fri Jul 19, 2013 7:23 am

Re: Wombat Cook Out

Post by Dale »

Cook outs are always fun aren't they?
Dale
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

Dale, that WAS fun. I did giggle when the flames erupted from the ends, just as you said would happen. :o

Max

PS--My wife said I was easily entertained which is probably true. 8-)
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Wombat Cook Out

Post by Bullfrog »

Thank you for recording the weight data Dr. Science! And here is the equivalent of your quarter pound(+) of nasty carbon build up. :D
Image
Ed
Keep the rubber side down!
User avatar
Pep
Posts: 312
Joined: Fri Jul 19, 2013 12:15 pm
Location: Dripping Springs, TX

Re: Wombat Cook Out

Post by Pep »

Yep, cookouts are mighty fun. Friends with forges are the best kind.
Laurie
Attachments
IMG_2671.JPG
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

Bullfrog wrote:Thank you for recording the weight data Dr. Science! And here is the equivalent of your quarter pound(+) of nasty carbon build up. :D

Ed
Ed, that's a good illustration of what could be lurking in our pipes. I was somewhat amazed at the final weigh-in. I expected only an ounce or two and your visual clearly shows this to be a needed maintenance item.

Max

PS--and Laurie, again, there's more than one way to skin a cat! 8-)
User avatar
RichardMott
Posts: 552
Joined: Mon Jul 22, 2013 12:36 am
Location: King of Prussia, Pa

Re: Wombat Cook Out

Post by RichardMott »

Hey Ben, how about a BBQ? :lol:
Attachments
BBQ anyone?
BBQ anyone?
Rick Mott

In order to be old and wise, you must survive young and stupid!
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

RichardMott wrote:Hey Ben, how about a BBQ? :lol:
Timely Rick, Just finished reading your article in the soon to be out Resonator. Ben will know all the tricks of the trade including pipe BBQs thanks to you. Great project!

Maxie
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

OK, a little more geeky Dr. Science stuff. Ed's scales are probably way more accurate than mine so comparing apples to apples I put the pipe back on the scales and added charcoal lumps until I got the combination to weigh an even six pounds as it weighed before burn-out. I ended up with six lumps to Ed's five which means it's even worse than I thought. A little more scientific study would probably reveal that Ed has wet charcoal. 8-)

Dr. Science
Attachments
This could be lurking in your pipe.
This could be lurking in your pipe.
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Wombat Cook Out

Post by Bullfrog »

Aw, what's a 1 lump difference between fellow scientists? (It's still quite a lot of nasty carbon build up!)

Ed
PS: Kingsford brand charcoal is the standard of choice for this type of scientific research. Didja know that?
Keep the rubber side down!
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

Kingsford it was, you might of had a denser batch but mentioning that you had wet charcoal sounded funnier. :lol:

Maxie

PS-- the speedometer read 4,689 miles which we could add to the database. Preliminary calculations reveal that carbon could accumulate at the rate of 1 lump every 780 miles or about 1.3 lumps per 1000 miles. Dr Science is on a roll.
BrianZ
Posts: 493
Joined: Fri Jul 19, 2013 3:28 pm
Location: Ontario, Canada

Re: Wombat Cook Out

Post by BrianZ »

Now I want to see you figure out how much carbon is generated per ounce of premix oil. Or... Maybe you can prove that Hodakas are environmentally friendly because all the emissions end up being stored in the pipe. :geek:

Brian
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

Funny Brian, I'm still giggling about the emissions being stored in the pipe. I never considered that and that would be partly true if we didn't set fire to it occasionally. Anyway, being serious (which is hard for me to do), maintenance schedules could be figured out by weighing the exhaust pipe occasionally and removing the carbon as deemed necessary rather than all of these funny calculations.(But what fun is that?) All in the name of science!

Max
User avatar
Dale
Posts: 1272
Joined: Fri Jul 19, 2013 7:23 am

Re: Wombat Cook Out

Post by Dale »

To be scientific, wouldn't you need to factor in the brand of oil and the ratio being used? :P
Dale
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

Dale, It does get the brain to think about all the processes that cause carbon based crud to form in two-stroke exhaust systems. I remember the frequent closing of the exhaust port when using castor oil in the early days. I would think jetting would also be a big factor with not only running more oil and fuel through but rich mixtures causing incomplete combustion. I suppose that reflection points in pipe design could also deposit pollutants in certain areas and on and on. All fun to think about.

Question; what do you chrome pipe guys do to deal with the problem? (Plumbers drain snakes come to mind.) :roll:

Max
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Wombat Cook Out

Post by hodakamax »

Science--Love it. :D

Actually a sticker on my tool box. Dr.Science was a character on Public Radio that answered questions like: Why are there two prongs on electrical cords? Answer: That way the power can come in on one prong , be used and be sent back to the power plant on the other prong, where they send it back to you again if you're stupid enough to buy it.

A little slow in the shop today. 8-)

Maxie
Attachments
DSCN0974.JPG
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests