Model 98 carb on Combat Wombat with reed

The main Page for the Hodaka Club Discussion Group
User avatar
bchappy
Posts: 448
Joined: Fri Jul 19, 2013 6:46 am
Location: Monument, CO

Re: Model 98 carb on Combat Wombat with reed

Post by bchappy »

I am always amazed at the time Ed puts into answering our questions. Thanks so much!
Thanks to you Paul and all the others for sharing your vast knowledge.
Without this forum a lot of us would be out there wondering around on our own.
Bill Chapman, Monument, CO
Raced and Modified Hodakas in Statesville NC back in the day.
User avatar
Dale
Posts: 1272
Joined: Fri Jul 19, 2013 7:23 am

Re: Model 98 carb on Combat Wombat with reed

Post by Dale »

I will second that. This Hodaka forum is by far the best motorcycle forum that I have seen and of course that is simply due to the people that are involved with it. Thanks!
Dale
User avatar
admin
Site Admin
Posts: 799
Joined: Tue May 14, 2013 4:15 am

Re: Model 98 carb on Combat Wombat with reed

Post by admin »

Thanks guys and gals. It is all because of all of you!
The forum has served it purpose to educate and be a place to voice ideas and opinions.
Thank you all and a special thanks to the Captain. Where else can you still get personalized help from the vintage motorcycle brands service manager?
Not only the service manager but also the official Hodaka pin up model :-)
Penelope Pitstop has nothing on Ed !!
Capt. call me one of these days......
User avatar
bchappy
Posts: 448
Joined: Fri Jul 19, 2013 6:46 am
Location: Monument, CO

Re: Model 98 carb on Combat Wombat with reed

Post by bchappy »

Now that I didn't know. Ed a pinup model ;)
Bill Chapman, Monument, CO
Raced and Modified Hodakas in Statesville NC back in the day.
User avatar
RichardMott
Posts: 552
Joined: Mon Jul 22, 2013 12:36 am
Location: King of Prussia, Pa

Re: Model 98 carb on Combat Wombat with reed

Post by RichardMott »

Well of course he is. Who do you think this sharp dressed rider is?
Attachments
Ed and the CW Enduro kit
Ed and the CW Enduro kit
Rick Mott

In order to be old and wise, you must survive young and stupid!
User avatar
admin
Site Admin
Posts: 799
Joined: Tue May 14, 2013 4:15 am

Re: Model 98 carb on Combat Wombat with reed

Post by admin »

I was referring to the "Burt Reynold's" style poster of Ed that Hodaka published
User avatar
bchappy
Posts: 448
Joined: Fri Jul 19, 2013 6:46 am
Location: Monument, CO

Re: Model 98 carb on Combat Wombat with reed

Post by bchappy »

Anybody got a copy of it they can post?
Bill Chapman, Monument, CO
Raced and Modified Hodakas in Statesville NC back in the day.
User avatar
admin
Site Admin
Posts: 799
Joined: Tue May 14, 2013 4:15 am

Re: Model 98 carb on Combat Wombat with reed

Post by admin »

They are kinda rare as Ed bought everyone of them up!!
He was giving them out as Christmas presents :-)

I told him to call me but I guess he is calling me #$%&*(@#$ out loud instead of using the phone......
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Model 98 carb on Combat Wombat with reed

Post by Bullfrog »

FYI -- Burt and I are good buddies, and he got the short straw for that particular photo-shoot. So there are no such pin-up photos of me.

Ed
PS: Paulie, ya'll need a slap up along side the head! ;) I thought you said give me a call "one of these days" -- one of these days is coming up soon. Who knows, possibly this afternoon (Athena time)
Keep the rubber side down!
User avatar
admin
Site Admin
Posts: 799
Joined: Tue May 14, 2013 4:15 am

Re: Model 98 carb on Combat Wombat with reed

Post by admin »

Your the best Capt.!!
Off the rest of today with Amy, Henrik and the baby. I'll catch up to ya one of these days. Will also see you sometime this fall.
User avatar
admin
Site Admin
Posts: 799
Joined: Tue May 14, 2013 4:15 am

Re: Model 98 carb on Combat Wombat with reed

Post by admin »

Found one of Ed's promotional shots today but do not understand what it means??
Attachments
ed0001.jpg
Zyx
Posts: 926
Joined: Sat Mar 22, 2014 4:41 pm

Re: Model 98 carb on Combat Wombat with reed

Post by Zyx »

My guess is he is out of the closet now...
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Model 98 carb on Combat Wombat with reed

Post by Bullfrog »

Paulie - don't you have some grandkids to play with or something? (rather than scanning old stuff and posting things and comments that make me spew coffee when I see 'em? I've been chuckling all day about this latest one. :lol: )

Ed
PS: We've been out to have a brew or two . . . what's so hard to understand about the term "windbreaker"? :lol:
Keep the rubber side down!
User avatar
admin
Site Admin
Posts: 799
Joined: Tue May 14, 2013 4:15 am

Re: Model 98 carb on Combat Wombat with reed

Post by admin »

Miss you Eddie!
Give Miss Judy a hug from us also.
Grandkids are all safe and smiling and so am I. Tractor and dozer are running great.Funny how grandsons love to push down old trees.
If you go to Mo's I'll take four stuffed avocado's with crab.
The guy at the wine shop at Devil's Punch Bowl will know who you are but don't expect a discount :-) Good thing you drink good beer.
Bob Whitman said you turned in your article last week??? You sure know how to make a guy look bad!
I have to send to you and Kenny the Pedersen article part 2 tomorrow to be sure I am politically correct......
Smile have fun and enjoy your grand kids too !
See ya soon I promise .....or is that a threat :-)
taber hodaka
Posts: 2240
Joined: Mon Jul 29, 2013 6:34 pm

Re: Model 98 carb on Combat Wombat with reed

Post by taber hodaka »

You all need to be good to Ed, he probably still has a case or two of these Ace vice's, I sure like mine. If you are nice he may just give you one if he has any. -------Clarence
DSCN1922.JPG
User avatar
Bullfrog
Posts: 2784
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Model 98 carb on Combat Wombat with reed

Post by Bullfrog »

Hey! That looks like it might be an ACE 90 vise! (just shy of 4" jaw opening) ;)

Ed
PS: I've never seen an "ACE" vice. I wonder if they were built before or after "ACME" vises?? (beep-beep)
Keep the rubber side down!
Post Reply

Who is online

Users browsing this forum: ossa95d and 0 guests