got it!

Ok on to the next thing. I seem to be missing the mixing chamber cap for my carb and it looks like they are not available anymore. Does anyone know of a modern direct replacement that will work?

Thanks for the info! After looking at the other thread on the jig it looks like he did not remove his front sprocket when splitting the cases? If possible i would like to get away with just removing the flywheel as well. I got a flywheel puller from the local motorcycle shop. It is a 27x1mm. Is this...

Got a manual coming! And pulled the head and piston and have flushed the bottom end with solvent. It was really gunked up and nasty down there but the cylinder and piston both looked like they were in great shape. I noticed that the case leaked quite a bit of the solvent when i had it soaking for a ...

Whew... luckily there was a spare carb on ebay for not too much money so i snatched it up for parts. The engine most definitely needs to be cleaned. I have a solvent tank in my shop so that should be cake to flush. It is a very simply bike but, the further i dig the more stuff i find wrong which is ...

Yes, a manual is a must and a good start... You can confirm that the transmission internals are shifting by moving the shift control shaft in or out with one hand as you rock the countershaft sprocket back and forth with the other hand. You will feel the end of the control shaft movement against th...

Thanks for the reply. I'm guessing this is the kit you are talking about: http://www.strictlyhodaka.com/ProductDetails.asp?ProductCode=202502_92A And this looks like the closest thing i could find to a manual for this bike on the site: http://www.strictlyhodaka.com/ProductDetails.asp?ProductCode=929...

Here are some images of inside the magneto cover. I am beginning to think that the guy that sold me this just had no idea what was going on and there is nothing wrong with the trans. I was however able to move the sprocket shaft? In and out and it did not seem to "click into the different gears...

The two screws i was talking about are number (15) in the picture. I fear that (#16) might be missing... but when the motor was still mounted you could see the arm moving in and out with each click because the magneto cover was off but did not seem to change the gears. Ill try to get some pics tomor...

Hi all, Just picked up a 1968 model 92 Ace 100 off the local craigslist here in Oregon and it needs some help and so do I. Good thing about this bike is that there is only minor rust and no corrosion what so ever. No cracks in the cases and the motor has good compression from what i can tell but has...