:o Wow that is a great looking short tracker, You might have said but where does this machine live now and was it ever raced and at what short track, I assume in Northern Calif. If it was raced, do you know what years. I was orginally from Northern Calif and raced there for over 25 years, all kinds ...

:D :roll: Hello, I would to say that Dale,s explaination makes most since, I would like to know if you can measure the distance between frame tubes where the fender would be mounted as well as some sort of measurement from the mounting bolts at the front of where the fender is mounted and the mounti...

Hello, you might consider, going this site Strickly Hodaka, and see the great tank rust
prevention and saving products they sell, some of the best stuff on the market.
Tank a look. Bruce Hodakaparts.com Idaho.

Great Job, was very effective and informative. Video,s work well when well done and this one is a good example on how easy it is to do. Keep it on subject and short. Great Job. I too would like to see some sort of index being developed for the Videos on the Forum, based on the area work is being don...

Hello, This is Bruce of Hodakaparts.com Idaho, we would suggest that the company and set that Laura in Texas is using seems is the best out there as a very good replacement for orginal looking shocks, they seem to work well and reasonable priced. We here did a lot of research on trying to find direc...

Dale , I know you quoated the thread size but is there a replacement petcock out there you have found with that thread. To fit directly into tank and use as a pet cock. Paul Strickly Hodaka, has some new replaca ones in his inventory program as well.

Bruce Hodakaparts.com

Hello again; Please, for the best results in repacking a exh. use only the products purchased at a motorcycle shop, FMF is one supplier but there are others. It is designed to be used in the exh. envoment. Household insulation will not last as long, and will not hold up a needed, they will work but ...

Hello, we have plenty of 1/2 cases, for Left and Right for ACE 100, if they are the same
let me know, so we can talk, Bruce Young Hodakaparts.com Idaho,

This is a tech question I do not have experience in. But we have lots. Bruce

Good call Dale, if ammoDave does go with the shorty silencer, a short version that was special built for smaller machines, to keep the silencer from sticking out to far behind the bike. Remember that the repack program has to be done every few months to keep it in good shape and working properly. Bu...

Hello again, yes it can be pulled, and replaced with an aftermarkete silencer, but need to find inside size of the tail pipe, That way you could find an silencer that would fit into the pipe end, with clamp or bolt on, If you go that way try and find what was call a shorty silencer. It would not be ...

Hello, Is it possible you might be able to send in a picture of this pipe you have, also would like to know what size the end of the : PIPE : is, If you don,t run or ride in the National parks or forest, you could remove the spark arristor,and then find an after market silencer, like an FMF that wou...

Hello Roger and Jimmy, great detective work. Welcome to the world of ACE,s, changes where done mid year, and sometimes only mention with in the Manual Modification section of each machine. One has to be careful, if working with the early ACE models. It seems changes where made when supplies of a pro...

Hello, I think at this time the springs would be ok, It sounds you have taken all the right steps to prevent any further issues, good job.
remember; A little preventive medicine goes a long way,
Thanks Bruce Young Hodakaparts.com

Hello, Great work, now that points out to all of us in the Hodaka world, how important a little $.35 item, can be. Also I hope you replaced the springs behind the balls as well. Both very important in making smooth shifts and etc. I might suggest that you change your oil after a little riding, while...

Hello, Jimmy, First the correct wiring diagram with color info and location and etc, is on Pauls web site just look to see where its posted on the site. Before that you will need to check the frame numbers to determine which model you realy have. Then got to diagram that is for that model. There are...

Hello Texas, Coil Mtg. Does your frame have two small tabs to mount the coil to the frame, and is the coil grey in color, and about 4" long. Thats an ACE 90 coil. Other type of coil is light grey blue in color and about 5" in length and the mount is just one longer tab. Eather way the coil...

Hello, :idea: Burr- Texas; one other simple issue that can happen when you pull the spark plug cap off the Plug, if its some models there is a spring inside that will pull out a little and then when put back on will not make proper connection. This is especially true on Magura and early NGK type spa...

Hello, Hodaka world. I just had a very nice conversation with Paul and it seems there has been a slow response from we the Hodaka world, as to what Videos, we might have and have not sent in yet to re-add to the forum. Remember all the old ones are gone, the server company expunged all the old files...

Hello,, Please contact eather Hodakaparts.com in Idaho, or Strictly Hodaka for used part to help with missing carb parts. Thanks BCY hodakaparts.com Idaho

:D :D :D :D Thank you Dale for the post, I have to say with a great deal of pride, to all the Hodaka World, Dale was our first real customer we had after starting our little Hodaka project to help the Hodaka World with parts and pieces for ACE 90 and ACE 100 machines thanks to my friend Paul and his...

Hello, we at Hodakaparts.com in Idaho, have several of used VM 20 carbs if you enterested, as well as other pre-owned supplies to help save some dollars in this rebuild. Thanks Bruce Young

Hello, If I may suggest first you need to determine, each bikes frame number and engine number and then model of each exactly. Once you have the numbers you can then go to Strickly Hodaka site and determine model. At that point in time I strongly suggest you invest in manuals and parts info for each...

Hello Paul; If I may I would like to through my two cents into the ring; We all have ideas on what we want to see. I would hope that there is some way to determine how many times a topic has been brought to the forum over the years. I would think that your records should produce that info. Run video...

Welcome back, this type of resurection is an understatment in the Hodaka World thesse past few years. Old machines are coming out of the barns and firing up again. Seems like a lot of rebuilds to bring back old memories are happining a lot these days. If you can try to make the 50th annual Hodaka Da...

Hello, you might check to see if the cable adj is correct and the cable has not stretched too much to adj. any more or not like it should. Also make sure the adj. screw is correct for the perch and adj. like it should, Last you might just check the brake lever pivot that goes through the backing pla...