The Hodaka Club Forum

Sorry for the reader numbers listed here, they are probably off by 160,000, it was meant for hodaka friends, but it was read by the trivia players. ------ Clarence

Thanks Dale there are probably 270,000 reads that should have not counted so hope we are back to normal. Clarence

How wide were the forks on the first hodaka ACE 90 before the MK11, the hodaka 90 MK11 and the ace 100 center to center. ---------- Clarence

Center to center on the fork tube for the first ace 90 was 5&7/8 the same for the MK11 hodaka and the ace 100. As I think the 92A, 92B and the 92B+ are 6&1/2 inches center to center and the same for the super combat. The handle bar holder 908727 was 2&1/8 between bolts. The MK11 measured 2&11/16 and became part number 908727A. The first ace 90 before the MK11 had a square opening under the handle bar and looks beefier, The handle bar holder on the before MK11 has Hodaka engraved in, not raised. -------------- Clarence

Clarence, you really know stuff . im in awe of your vast knowledge of all things HODAKA..........albert

Tell the wife, she tells me my memory is getting better, because every time I tell a story, I add more and it gets bigger. I know the changes but I measured the differences, looked up the part numbers and used the correct name.-----Clarence

lets not bring the wives into this i have a enough problems ....albert