Ace 100 stator assembly needed

The main Page for the Hodaka Club Discussion Group
Post Reply
bobwhitman
Posts: 401
Joined: Sat Jul 27, 2013 4:49 pm
Location: Eugene, OR

Ace 100 stator assembly needed

Post by bobwhitman »

All-
I need a good, or easily repairable, stator assembly for an Ace 100 (two coil version). I have a huge amount of parts (I know, I'm sick) to trade. I need the Ace 100 assy to convert an Ace 90, which manages to eat even NOS parts.
Bob 541-954-01011
dirty_rat
Posts: 724
Joined: Mon Jul 22, 2013 10:39 am
Location: Spring Hill, FL

Re: Ace 100 stator assembly needed

Post by dirty_rat »

Have you checked with Bruce Young? I'm sure he probably has some good used ones available. Just a thought.
bobwhitman
Posts: 401
Joined: Sat Jul 27, 2013 4:49 pm
Location: Eugene, OR

Re: Ace 100 stator assembly needed

Post by bobwhitman »

Just checked; no luck! Still seeking. Remember, I have LOTS of trading stock.
Bob
dirty_rat
Posts: 724
Joined: Mon Jul 22, 2013 10:39 am
Location: Spring Hill, FL

Re: Ace 100 stator assembly needed

Post by dirty_rat »

Bob,

I'll check my stash. I have some, but I'm not sure on what wires are still attached. Are you needing one with all the lighting and charging connectors attached? Let me know and I'll see what I have.
dirty_rat
Posts: 724
Joined: Mon Jul 22, 2013 10:39 am
Location: Spring Hill, FL

Re: Ace 100 stator assembly needed

Post by dirty_rat »

Here are a couple of photos of the best one I have. It will probably need new points and condenser. The wires were also cut off short, but there is plenty remaining to splice in new wires and add the connectors. I also have a couple of loose lighting coils if that is all you need.
Attachments
DSC_8511.JPG
DSC_8510.JPG
DSC_8512.JPG
bobwhitman
Posts: 401
Joined: Sat Jul 27, 2013 4:49 pm
Location: Eugene, OR

Re: Ace 100 stator assembly needed

Post by bobwhitman »

Thank you, Rat. I think more digging turned up the needed parts here. Just have to swap a coil, and maybe replace points and condensers. Appreciate your kind offer!
Bob
dirty_rat
Posts: 724
Joined: Mon Jul 22, 2013 10:39 am
Location: Spring Hill, FL

Re: Ace 100 stator assembly needed

Post by dirty_rat »

No problem. Let me know if you get it sorted.
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests