Oil seal

The main Page for the Hodaka Club Discussion Group
Post Reply
thrownchain
Posts: 1919
Joined: Sun Jul 21, 2013 8:52 am

Oil seal

Post by thrownchain »

Most brittle one I’ve come across yet.
Attachments
216DF2B8-93B9-48D3-826E-5571F60E5169.jpeg
User avatar
Bullfrog
Posts: 2744
Joined: Mon Jul 22, 2013 4:05 pm
Location: Oregon, 12 miles from the center of the Hodaka Universe(Athena)

Re: Oil seal

Post by Bullfrog »

Aw c'mon, that'll buff ou . . . No. Wait. Wrong response. Duct tape'll fix that. :roll:

Ed
Keep the rubber side down!
thrownchain
Posts: 1919
Joined: Sun Jul 21, 2013 8:52 am

Re: Oil seal

Post by thrownchain »

That snapped like it was made out of Bakelite
Bruce Young
Posts: 493
Joined: Wed Jul 24, 2013 6:48 am

Re: Oil seal

Post by Bruce Young »

Danial, want some more just like that, Time is a Vintage bike enemy. HODAKA WORLD, TAKE NOTES, Dan is trying to point out something here. Don,t guess at it, replace it, is the quote of the day. Replace it, its cheap insurance. Bearings as well. Terry of Hodaka-parts inc has whole kits ready to go.
Bruce Young - HodakaPartsIdaho
thrownchain
Posts: 1919
Joined: Sun Jul 21, 2013 8:52 am

Re: Oil seal

Post by thrownchain »

The seals getting hard I’m used to, but this one was actually brittle, those two conditions don’t provide a good seal and can cost you a motor if you don’t take the time to change them after a long period of non use.
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Oil seal

Post by matt glascock »

Just super glue the pieces together or whatever and send it to me. I'll dress it for you with my Dremel.
viclioce
Posts: 4804
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: Oil seal

Post by viclioce »

RTV Cement is King! LOLOL!!! :ugeek: Victor
Attachments
EA638067-0B9E-45E5-9200-03265221800F.jpeg

1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
thrownchain
Posts: 1919
Joined: Sun Jul 21, 2013 8:52 am

Re: Oil seal

Post by thrownchain »

I’ll go all out, bite the bullet and get a new one. ( I own my own dremel tool)
fortunet1
Posts: 31
Joined: Sat Feb 06, 2021 5:33 pm

Re: Oil seal

Post by fortunet1 »

thrownchain wrote: Fri Feb 05, 2021 4:42 pm I’ll go all out, bite the bullet and get a new one. ( I own my own dremel tool)
Can you tell me what part# that is on a 93A SUPER RAT schematic chart ?

New to this engine...haven't split the cases yet and I'd like to learn ahead of time what to plan on replacing .

Thanks so much
john
viclioce
Posts: 4804
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: Oil seal

Post by viclioce »

Buy the Super Rat bottom end rebuild kit from Terry Larson! Make sure you select the correct model ftom the drop down box! :ugeek: Victor

http://hodaka-parts.com/item.asp?cID=0&PID=6548
Attachments
E67AED02-5584-4839-99E7-0B14841CE485.jpeg

1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Oil seal

Post by matt glascock »

I'm sure you have a Dremel tool, Thrown. Please don't think I was questioning the depth of your bench. It's just that...er...when it comes to some of the more, shall we say "off-label" experience in ill-advised, yet oddly ineffective applied Dremel-ogy, I'm kinda the big dog around here. Yep.
thrownchain
Posts: 1919
Joined: Sun Jul 21, 2013 8:52 am

Re: Oil seal

Post by thrownchain »

I’ve heard that you’re the dermal guru, but I’ll walk my own path....,
viclioce
Posts: 4804
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: Oil seal

Post by viclioce »

Of course, we are all joking here about repairing a seal!!! 😉🤣👍 Victor

1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Oil seal

Post by matt glascock »

Who's joking. I just chucked up my brass wheel. Bring it!
thrownchain
Posts: 1919
Joined: Sun Jul 21, 2013 8:52 am

Re: Oil seal

Post by thrownchain »

I have an agriculture background, we fix everything we can. .....
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Oil seal

Post by matt glascock »

I have depression-era parents. Ditto.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests