The Hodaka Club Forum

thanks

Artwork, Rich. Real true artwork.

thank you

Update- Managed to round up oil dip stick, fork brace, head, gas cap, foot pegs. Still eluding me is rear sprocket, fender mount, and sounds like their skid plate. Reach out if any surface. 2 eye balls can covers so milk crates .

How about posting some photos of what you've collected so far?

Here is what a Webco gas cap looks like:

And a set of Webco foot pegs:

Lets try that again, foot pegs:

DR,
Thanks for posting the photos of the cap and foot pegs. I have my 71 93a that my parents had bought for me when I was a kid. It was used and from what I can tell it was raced before it was mine. Where the steering head meets the frame and gussets it is cracked (I'm assuming from being launched off of jumps). I had figured that the foot pegs were Webco Industries and your photos have confirmed it.
Many thanks!

Mine had more weld that original metal at the same spot. Rat abuse.

Matt,
Yep, weld em up and get them back out on the track. I figured that another day would be just fine to repair it properly.

Yep. Looks very familiar

Aircan not Webco but filtron or Uni.
Anyone have 71-73’ Webco accessories catalog for Hodaka they can copy/email. Seen ad they did expansion pipe but 4-bolt sprocket; unsure if did one for 6-bolt cushion hub for 100B’s. Thx

Hope someone can find a 71-72’ Webco catalog to copy, read they did do a 6-bolt cushion hub sprocket too.

Then there is also the Webco forks springs. A quick question.......why are you using these Webco items on a Ace 100 and not a Super Rat?

danshale wrote:Hope someone can find a 71-72’ Webco catalog to copy, read they did do a 6-bolt cushion hub sprocket too.

I do have the cushioned sprocket on my old Ace short tracker. I'll see if I can find a picture of it.

Max

Hmm, best I can do today. The bike is hanging from the ceiling and you can only see the back side. We ran these on all our racers of the time until real cush hubs came out.

Max

Just saw this nice looking Webco Head on Ebay if anyone is flush and interested. I am one but not the other . . .
https://www.ebay.com/itm/WEBCO-HODAKA-A ... 2426948811

Webco cushion sprocket on the old Ace 90 racer. Max and I bought allot of the same good products. ----------------Clarence

Max & Clarence- Thanks for the sprocket photos, helpful. Reason earmarked for the Ace is I have one; it had Webco sticker on front fender and had a 100cc head to start w/. 72’ MX still eluding me.
Saw old ad Webco had a 100-pg catalog in 72 for a whole $1. If can find one can confirm all that may fit an Ace, just as a fun project.

That VT front end is just as nice as one I liked in Athena:).

Set of Webco footpegs in the wrapper and some Webco oil dipsticks on ebay.

Well the Ace work is beginning.. scaling back w/ oil dip stick & 100Cc head . It has other non-stock parts needing corrected. Did find a complete 100-125cc Webco top end for perhaps a future 100MX find.

Boy!!! Where are you finding all of this cool stuff? Joe Ormonde

Really! I've had my eye out for one of those Webco spark plug/wrench holders (that didn't have a zillion dollar price tag on it) for years!!