Hodaka Q&A

[taber hodaka]

Sorry for the reader numbers listed here, they are probably off by 160,000, it was meant for hodaka friends, but it was read by the trivia players. ------ Clarence

[taber hodaka]

Thanks Dale there are probably 270,000 reads that should have not counted so hope we are back to normal. Clarence

[taber hodaka]

How wide were the forks on the first hodaka ACE 90 before the MK11, the hodaka 90 MK11 and the ace 100 center to center. ---------- Clarence

[taber hodaka]

Center to center on the fork tube for the first ace 90 was 5&7/8 the same for the MK11 hodaka and the ace 100. As I think the 92A, 92B and the 92B+ are 6&1/2 inches center to center and the same for the super combat. The handle bar holder 908727 was 2&1/8 between bolts. The MK11 measured 2&11/16 and became part number 908727A. The first ace 90 before the MK11 had a square opening under the handle bar and looks beefier, The handle bar holder on the before MK11 has Hodaka engraved in, not raised. -------------- Clarence

[givergas]

Clarence, you really know stuff . im in awe of your vast knowledge of all things HODAKA..........albert

[taber hodaka]

Tell the wife, she tells me my memory is getting better, because every time I tell a story, I add more and it gets bigger. I know the changes but I measured the differences, looked up the part numbers and used the correct name.-----Clarence

[givergas]

lets not bring the wives into this i have a enough problems ....albert