Head gasket leak

The main Page for the Hodaka Club Discussion Group
Post Reply
budpat105
Posts: 63
Joined: Sun May 24, 2015 12:21 pm

Head gasket leak

Post by budpat105 »

So, I noticed some black oily on the top fin of cylinder of Combat. looks like head gasket may be leaking. That's just a guess on my part. Can I just retorque head? Pull head and install new head gasket without disturbing base gasket? Replace both gaskets?
thrownchain
Posts: 1919
Joined: Sun Jul 21, 2013 8:52 am

Re: Head gasket leak

Post by thrownchain »

New gasket and retorque ,make sure both gasket surfaces are clean , also check to make sure head isn’t warped.
viclioce
Posts: 4807
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: Head gasket leak

Post by viclioce »

You can anneal the head gasket and see if it seals. Heat the metal gasket up with a propane torch so it expands where it seals. Then let cool & reassemble. You may want to replace it anyway, but at least you can still ride while you wait for a new one to come! :ugeek: Victor

1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest