oil type and mixture ratios

The main Page for the Hodaka Club Discussion Group
Post Reply
paulie59
Posts: 4
Joined: Thu Apr 05, 2018 9:57 pm

oil type and mixture ratios

Post by paulie59 »

Hi folks,new hodaka owner here.Picked up a sweet little 68 Ace.The previos owner was running a Kawasaki semi synthetic at 32:1,Per the plug read its running a bit rich.I havent checked needle position yet are identified main and pilot jets yet but i will do so next Just wondering what other folks are mixing at and type oils.Synthetic,semi synthetic are other?Plug type and Gap?Thanks!
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: oil type and mixture ratios

Post by matt glascock »

Here's the absolute bottom line about pre-mix from a widely acclaimed authority (namely me). Yamalube 2-R mixed with 91-93 octane NON-ALCOHOL pump gas at a 32:1 gas to oil ratio. :lol:
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: oil type and mixture ratios

Post by hodakamax »

Yep
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: oil type and mixture ratios

Post by hodakamax »

Yep, I listen to authority and agree.
viclioce
Posts: 4805
Joined: Mon Apr 21, 2014 5:35 pm
Location: Santa Fe, NM
Contact:

Re: oil type and mixture ratios

Post by viclioce »

I have been currently using the Yamalube 2R. Prior to that I was using the 2S. I like the 2R better! Mixing it at 32:1 joe 4 Oz per gallon! :ugeek: Victor

1978 175SL
1976 03 Wombat
1975 99 Road Toad (2)
1973 96 Dirt Squirt (2)
1973 “Wombat Combat”
1973 Combat Wombat
1972 94 Wombat (2)
1972 Super Squirt
1971 92B+ Ace
1970 92B Ace 100B (2)
1968 92 Ace 100
1966 Ace 90
; D Victor
go_hercules
Posts: 130
Joined: Tue May 16, 2017 5:13 pm

Re: oil type and mixture ratios

Post by go_hercules »

Me too on the 32:1 2R. But I run avgas since I can't get ethanol free pump gas.
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: oil type and mixture ratios

Post by matt glascock »

Also remember, Yamalube 2S is formulated for oil injection applications and 2R is for premix. Not interchangeable. 2R is too thick to run through oil injection pumps accurately. (That tidbit actually came from a real authority :lol: ). Just an anecdote here - one of my riding buds premixed with 2S at 32:1 in a pinch and with that, fouled plugs every 5 minutes.
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests