Looking for Webco Items
Re: Looking for Webco Items
Artwork, Rich. Real true artwork.
Keepin' the Shiny Side up
on a '72 Wombat 94
--Bill
on a '72 Wombat 94
--Bill
Re: Looking for Webco Items
Update- Managed to round up oil dip stick, fork brace, head, gas cap, foot pegs. Still eluding me is rear sprocket, fender mount, and sounds like their skid plate. Reach out if any surface. 2 eye balls can covers so milk crates .
Re: Looking for Webco Items
How about posting some photos of what you've collected so far?
Re: Looking for Webco Items
Here is what a Webco gas cap looks like:
Re: Looking for Webco Items
And a set of Webco foot pegs:
Re: Looking for Webco Items
DR,
Thanks for posting the photos of the cap and foot pegs. I have my 71 93a that my parents had bought for me when I was a kid. It was used and from what I can tell it was raced before it was mine. Where the steering head meets the frame and gussets it is cracked (I'm assuming from being launched off of jumps). I had figured that the foot pegs were Webco Industries and your photos have confirmed it.
Many thanks!
Thanks for posting the photos of the cap and foot pegs. I have my 71 93a that my parents had bought for me when I was a kid. It was used and from what I can tell it was raced before it was mine. Where the steering head meets the frame and gussets it is cracked (I'm assuming from being launched off of jumps). I had figured that the foot pegs were Webco Industries and your photos have confirmed it.
Many thanks!
-
- Posts: 2520
- Joined: Thu Oct 24, 2013 5:20 pm
Re: Looking for Webco Items
Mine had more weld that original metal at the same spot. Rat abuse.
Re: Looking for Webco Items
Matt,
Yep, weld em up and get them back out on the track. I figured that another day would be just fine to repair it properly.
Yep, weld em up and get them back out on the track. I figured that another day would be just fine to repair it properly.
-
- Posts: 2520
- Joined: Thu Oct 24, 2013 5:20 pm
Re: Looking for Webco Items
Yep. Looks very familiar
Re: Looking for Webco Items
Aircan not Webco but filtron or Uni.
Anyone have 71-73’ Webco accessories catalog for Hodaka they can copy/email. Seen ad they did expansion pipe but 4-bolt sprocket; unsure if did one for 6-bolt cushion hub for 100B’s. Thx
Anyone have 71-73’ Webco accessories catalog for Hodaka they can copy/email. Seen ad they did expansion pipe but 4-bolt sprocket; unsure if did one for 6-bolt cushion hub for 100B’s. Thx
Re: Looking for Webco Items
Hope someone can find a 71-72’ Webco catalog to copy, read they did do a 6-bolt cushion hub sprocket too.
Re: Looking for Webco Items
Then there is also the Webco forks springs. A quick question.......why are you using these Webco items on a Ace 100 and not a Super Rat?
Re: Looking for Webco Items
I do have the cushioned sprocket on my old Ace short tracker. I'll see if I can find a picture of it.danshale wrote:Hope someone can find a 71-72’ Webco catalog to copy, read they did do a 6-bolt cushion hub sprocket too.
Max
Re: Looking for Webco Items
Hmm, best I can do today. The bike is hanging from the ceiling and you can only see the back side. We ran these on all our racers of the time until real cush hubs came out.
Max
Max
Re: Looking for Webco Items
Just saw this nice looking Webco Head on Ebay if anyone is flush and interested. I am one but not the other . . .
https://www.ebay.com/itm/WEBCO-HODAKA-A ... 2426948811
https://www.ebay.com/itm/WEBCO-HODAKA-A ... 2426948811
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
-
- Posts: 2209
- Joined: Mon Jul 29, 2013 6:34 pm
Re: Looking for Webco Items
Webco cushion sprocket on the old Ace 90 racer.
Max and I bought allot of the same good products. ----------------ClarenceRe: Looking for Webco Items
Max & Clarence- Thanks for the sprocket photos, helpful. Reason earmarked for the Ace is I have one; it had Webco sticker on front fender and had a 100cc head to start w/. 72’ MX still eluding me.
Saw old ad Webco had a 100-pg catalog in 72 for a whole $1. If can find one can confirm all that may fit an Ace, just as a fun project.
Saw old ad Webco had a 100-pg catalog in 72 for a whole $1. If can find one can confirm all that may fit an Ace, just as a fun project.
Re: Looking for Webco Items
That VT front end is just as nice as one I liked in Athena:).
-
- Posts: 1919
- Joined: Sun Jul 21, 2013 8:52 am
Re: Looking for Webco Items
Set of Webco footpegs in the wrapper and some Webco oil dipsticks on ebay.
Re: Looking for Webco Items
Well the Ace work is beginning.. scaling back w/ oil dip stick & 100Cc head . It has other non-stock parts needing corrected. Did find a complete 100-125cc Webco top end for perhaps a future 100MX find.
-
- Posts: 355
- Joined: Sat Oct 07, 2017 4:26 pm
Re: Looking for Webco Items
Boy!!! Where are you finding all of this cool stuff? Joe Ormonde
-
- Posts: 2520
- Joined: Thu Oct 24, 2013 5:20 pm
Re: Looking for Webco Items
Really! I've had my eye out for one of those Webco spark plug/wrench holders (that didn't have a zillion dollar price tag on it) for years!!
Who is online
Users browsing this forum: No registered users and 1 guest