Looking for Webco Items

The main Page for the Hodaka Club Discussion Group
dirty_rat
Posts: 718
Joined: Mon Jul 22, 2013 10:39 am
Location: Spring Hill, FL

Re: Looking for Webco Items

Post by dirty_rat »

Here is what a Webco gas cap looks like:
Attachments
Webco gas cap
Webco gas cap
Webco gas cap
Webco gas cap
dirty_rat
Posts: 718
Joined: Mon Jul 22, 2013 10:39 am
Location: Spring Hill, FL

Re: Looking for Webco Items

Post by dirty_rat »

And a set of Webco foot pegs:
dirty_rat
Posts: 718
Joined: Mon Jul 22, 2013 10:39 am
Location: Spring Hill, FL

Re: Looking for Webco Items

Post by dirty_rat »

Lets try that again, foot pegs:
Attachments
pegs
pegs
pegs
pegs
pegs
pegs
pegs
pegs
DG29
Posts: 27
Joined: Thu Oct 29, 2015 7:14 pm

Re: Looking for Webco Items

Post by DG29 »

DR,
Thanks for posting the photos of the cap and foot pegs. I have my 71 93a that my parents had bought for me when I was a kid. It was used and from what I can tell it was raced before it was mine. Where the steering head meets the frame and gussets it is cracked (I'm assuming from being launched off of jumps). I had figured that the foot pegs were Webco Industries and your photos have confirmed it.
Many thanks!
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Looking for Webco Items

Post by matt glascock »

Mine had more weld that original metal at the same spot. Rat abuse.
DG29
Posts: 27
Joined: Thu Oct 29, 2015 7:14 pm

Re: Looking for Webco Items

Post by DG29 »

Matt,
Yep, weld em up and get them back out on the track. I figured that another day would be just fine to repair it properly. :D
Attachments
20171026_083334.jpg
20171026_084652.jpg
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Looking for Webco Items

Post by matt glascock »

Yep. Looks very familiar :-)
danshale
Posts: 103
Joined: Wed Aug 10, 2016 4:47 pm

Re: Looking for Webco Items

Post by danshale »

Aircan not Webco but filtron or Uni.
Anyone have 71-73’ Webco accessories catalog for Hodaka they can copy/email. Seen ad they did expansion pipe but 4-bolt sprocket; unsure if did one for 6-bolt cushion hub for 100B’s. Thx
Attachments
EF4CF984-75FB-44B4-918D-25F3EF1BE502.jpeg
3070AFC9-0906-443B-8465-9F1EE4D32C9B.jpeg
D44F0CE6-E78D-4CBD-A855-8E9B91075D3B.jpeg
D100D285-55F2-41FF-9803-21C27958DDBC.jpeg
526BE43E-C5DB-4788-B14D-1D53A57A486F.jpeg
B6AB1BB9-D62B-4697-985F-C81DB231E887.jpeg
danshale
Posts: 103
Joined: Wed Aug 10, 2016 4:47 pm

Re: Looking for Webco Items

Post by danshale »

Hope someone can find a 71-72’ Webco catalog to copy, read they did do a 6-bolt cushion hub sprocket too.
DG29
Posts: 27
Joined: Thu Oct 29, 2015 7:14 pm

Re: Looking for Webco Items

Post by DG29 »

Then there is also the Webco forks springs. A quick question.......why are you using these Webco items on a Ace 100 and not a Super Rat?
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Looking for Webco Items

Post by hodakamax »

danshale wrote:Hope someone can find a 71-72’ Webco catalog to copy, read they did do a 6-bolt cushion hub sprocket too.
I do have the cushioned sprocket on my old Ace short tracker. I'll see if I can find a picture of it.

Max
User avatar
hodakamax
Posts: 2211
Joined: Thu Aug 28, 2014 9:56 am
Location: Parsons Kansas

Re: Looking for Webco Items

Post by hodakamax »

Hmm, best I can do today. The bike is hanging from the ceiling and you can only see the back side. We ran these on all our racers of the time until real cush hubs came out.

Max
Attachments
Cush sprocket
Cush sprocket
User avatar
Makotosun
Posts: 295
Joined: Tue May 19, 2015 10:28 pm
Location: Longview, WA
Contact:

Re: Looking for Webco Items

Post by Makotosun »

Just saw this nice looking Webco Head on Ebay if anyone is flush and interested. I am one but not the other . . . :lol:
webco1.jpg
webco2.jpg
https://www.ebay.com/itm/WEBCO-HODAKA-A ... 2426948811
"If you can't fix it with a hammer, then it's an electrical problem"
"Experience is something you don't get until just after you need it."
"You can tell a professional by the lack of wrinkles in his duct tape . . ."
taber hodaka
Posts: 2201
Joined: Mon Jul 29, 2013 6:34 pm

Re: Looking for Webco Items

Post by taber hodaka »

Webco cushion sprocket on the old Ace 90 racer.
DSCN0956.JPG
DSCN0962.JPG
DSCN1728.JPG
DSCN1727.JPG
Max and I bought allot of the same good products. ----------------Clarence
danshale
Posts: 103
Joined: Wed Aug 10, 2016 4:47 pm

Re: Looking for Webco Items

Post by danshale »

Max & Clarence- Thanks for the sprocket photos, helpful. Reason earmarked for the Ace is I have one; it had Webco sticker on front fender and had a 100cc head to start w/. 72’ MX still eluding me.
Saw old ad Webco had a 100-pg catalog in 72 for a whole $1. If can find one can confirm all that may fit an Ace, just as a fun project.
danshale
Posts: 103
Joined: Wed Aug 10, 2016 4:47 pm

Re: Looking for Webco Items

Post by danshale »

That VT front end is just as nice as one I liked in Athena:).
thrownchain
Posts: 1917
Joined: Sun Jul 21, 2013 8:52 am

Re: Looking for Webco Items

Post by thrownchain »

Set of Webco footpegs in the wrapper and some Webco oil dipsticks on ebay.
danshale
Posts: 103
Joined: Wed Aug 10, 2016 4:47 pm

Re: Looking for Webco Items

Post by danshale »

Well the Ace work is beginning.. scaling back w/ oil dip stick & 100Cc head . It has other non-stock parts needing corrected. Did find a complete 100-125cc Webco top end for perhaps a future 100MX find.
Attachments
C41DBFB5-D409-4E65-ADEE-93FBD7C91F8D.jpeg
Joe Ormonde
Posts: 354
Joined: Sat Oct 07, 2017 4:26 pm

Re: Looking for Webco Items

Post by Joe Ormonde »

Boy!!! Where are you finding all of this cool stuff? Joe Ormonde
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Looking for Webco Items

Post by matt glascock »

Really! I've had my eye out for one of those Webco spark plug/wrench holders (that didn't have a zillion dollar price tag on it) for years!!
TheBevman
Posts: 172
Joined: Fri Sep 06, 2013 5:04 am

Re: Looking for Webco Items

Post by TheBevman »

I hear ya Matt! I settled on a knock off plug and wrench holder but I'm in the market for a Webco Ace gas cap, the small one, for the father / kiddo project. Haven't seen one any where for awhile.

Bev
'72 Wombat (94)
'68 ACE 100 (Project with the kids)
'65 ACE 90? (Frame)
'66 Triumph Bonneville
'99 Triumph Adventurer
'66 Ace 90/100- Dirt only
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Looking for Webco Items

Post by matt glascock »

The last Webco plug/wrench holder I saw had "WI" engrossed on it and a price tag of $250. Ouch. You'll hate this, but might find yourself similarly lucky. Recently I was looking on ebay for a one-dent wonder Ace tank for a rider project. The banner read "Ace tank" and the description read "Ace tank. May fit other models. Some rust in tank. Alloy gas cap and brass petcocks included" for $66. I could tell just from the picture that in fact it was a really nice Super Rat tank with a Webco billet alloy gas cap. Needless to say I jumped on it like a junk yard dog jumps on a t-bone steak. Keep digging and searching. They are out there.
racerclam
Posts: 588
Joined: Wed Nov 20, 2013 7:01 am

Re: Looking for Webco Items

Post by racerclam »

$250 for a webco plug holder WOW! I got a deal I guess when I bought mine back in 1971 ! And I still have it 8o). I even have the webco adjustable main jet X's two

Rich
matt glascock
Posts: 2520
Joined: Thu Oct 24, 2013 5:20 pm

Re: Looking for Webco Items

Post by matt glascock »

Hey Rich. Isn't that crazy!?! I had one on my Super Rat back in the late 70's. It came on the bike which I bought for $100 in 1977. It ended up in the metal scrap tub at the filling station I worked for still attached to the right down tube after I cracked the frame for the zillionth time and bought an RM250. The self-loathing for that move continues to this day. I never had the adjustable main jet. I'm glad you still have yours. I bet you are too :) .
danshale
Posts: 103
Joined: Wed Aug 10, 2016 4:47 pm

Re: Looking for Webco Items

Post by danshale »

TheBevman
May consider this cap option- https://ventura.craigslist.org/mpo/d/vi ... 35809.html

Note, he’s shop in area of Ventura wildfires and may be wiped out.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests