Yes Tom , I cut the swingarm and angled it upward, Did not lenthen it since I wanted to keep a short wheel base for tight trail rides

Rich

another picture , wow Im learning , Thanks to Bill !

Tom , Here is My swing arm picture I hope anyway!

Thanks Bill you figured it out for me , you better look out now Im picture happy 8o)

Rich

Here you go Tom

Tom, I will do that tomorrow , I would post it here but dont know how 8o)

Rich

I believe Bill is correct on the o3 spring thing. I dont know measurements though and Im not going to tak mine out to measure them. If you have SL springs you will know when you ride it since the forks wont move much it will ride like a Mac thuck. If you have o3 springs it will sag without spacers. ...

Also if you are using forks from an SL 250 they will be Waaay to stiff, ED springs are a bit softer and the o3 wombat springs I think work best when used with about a 1 inch spacer.

Rich

Yep thats Lee Fabry's bike the cylinder and head was mad by Eric Jensen its a 100

Rich

For an iron cylinder wombat you could definatly improve cooling as its kinda small and compression can be upped also. The super Combat head would be difficult to improve on according to Harry Taylor since it is large and has that huge lower horizontal fin below the vertical fins , and it comes out d...

I think it was only there in the wide base cases that started in1972

Rich

Im currently Porting a 73 Suzuki 125 that has the same hole , BUT it leads to an oil injection port. Maybe Hodaka was considering it as an option someday?

Rich

Jay is a smart guy. I use the hole to fill with epoxy when I put a case port in. Its good to be back on here . I have has technical dificulties getting registered ever since the new format came to be, But Kaity at strictly Hodaka made it work for me. Happy thanks giving 8o)