I envy you giuys. Here I am with at least 2 feet of snow on the Ground muddy as hell.I can't even get my boat out of my garage to give me more room to play with my bikes. send some of that great weather to Montana right Taber
MTRob
Search found 219 matches
- Fri Mar 31, 2017 9:07 am
- Forum: HODAKA CHAT GROUP
- Topic: First Day of Spring!
- Replies: 45
- Views: 12591
- Thu Mar 16, 2017 9:40 am
- Forum: HODAKA CHAT GROUP
- Topic: 94 A turn signal problem
- Replies: 3
- Views: 1287
Re: 94 A turn signal problem
Jim
Make sure the flasher is 6 volt . 6.4volt works between 8watt-23watt. thats what I have in my 94A Wombat
there listed on Ebay under flashers its the wattage that will screw you up. But 8 watt - 23 watts cover all problems
MTRob
Make sure the flasher is 6 volt . 6.4volt works between 8watt-23watt. thats what I have in my 94A Wombat
there listed on Ebay under flashers its the wattage that will screw you up. But 8 watt - 23 watts cover all problems
MTRob
- Thu Mar 16, 2017 9:27 am
- Forum: HODAKA CHAT GROUP
- Topic: tapered rims
- Replies: 7
- Views: 2556
Re: tapered rims
Clarence I gauarantee you I'd have blown you off the track in motocross and crosscountry. In 71 My Suzuki was factory modified and was very fast. in Cut bank the Suzuki shop got suzuki to give and sell me all the coolest stuff. I didn;t have to pay much of anything, Suzuki even paid to send me to ra...
- Thu Mar 16, 2017 8:01 am
- Forum: HODAKA CHAT GROUP
- Topic: Resonator Volume 2 Issue 23 comments
- Replies: 50
- Views: 13914
Re: Resonator Volume 2 Issue 23 comments
Read about switches so I opened an old box and found 2, I have to look them up to see what they fit but they do work.
MTRob
MTRob
- Thu Mar 09, 2017 10:23 am
- Forum: HODAKA CHAT GROUP
- Topic: tapered rims
- Replies: 7
- Views: 2556
Re: tapered rims
So you don't know what ever happened to that trophy. Next time I go to Hell town I'll look up some older guys if there still alive an find out
You must have hit one of those gullies to fast and hit the other side ouch.
MTRob
You must have hit one of those gullies to fast and hit the other side ouch.
MTRob
- Thu Mar 09, 2017 10:17 am
- Forum: HODAKA CHAT GROUP
- Topic: air filter oil
- Replies: 12
- Views: 4365
Re: air filter oil
I use the same stuff I use in all my cars, trucks. K + N filter kit their cleaner and oil , works great on vehicles and bikes.
MTRob
MTRob
- Thu Mar 09, 2017 9:58 am
- Forum: HODAKA CHAT GROUP
- Topic: tapered rims
- Replies: 7
- Views: 2556
Re: tapered rims
Those were the days. Are you sure only 100 miles. those river crossing were a bitch. Do you know who ever ended up with the 6 ft traveling trophy. If I remember right it was some guy from Canada. Did you race any cross country races along the two medicine river on the blackfoot reservation west of C...
- Wed Mar 08, 2017 11:30 am
- Forum: HODAKA CHAT GROUP
- Topic: tapered rims
- Replies: 7
- Views: 2556
tapered rims
Hi all I rember back in 1971 Cut bank Montana used to have two 200 mile cross country races a year. We had a traveling trophy. Which the winner would get it with his name on it. The next race the winner would get the trophy with his name on it. so on & on. to this day I don't know who ended up w...
- Wed Mar 01, 2017 9:38 am
- Forum: HODAKA CHAT GROUP
- Topic: '72 Wombat (94) Stopped on me twice
- Replies: 54
- Views: 18495
Re: '72 Wombat (94) Stopped on me twice
Matt
Changed jets so many times I could do it in my sleep and setting the ignition, the 170 works the best at our allitude 3800 ft. Lucky for me have no neighbors that don't care I live up in the Montana mountains buy old man Clarence Taber.
MTRob
Changed jets so many times I could do it in my sleep and setting the ignition, the 170 works the best at our allitude 3800 ft. Lucky for me have no neighbors that don't care I live up in the Montana mountains buy old man Clarence Taber.
MTRob
- Wed Mar 01, 2017 9:16 am
- Forum: HODAKA CHAT GROUP
- Topic: Project Dirt Squirt
- Replies: 207
- Views: 80419
Re: Project Dirt Squirt
So these are the two dealership stickers that were still on the bike. The dealership was closed when the owner passed around 25 years ago, but I think they are an important part of this bike's history and need to be replaced. http://i1330.photobucket.com/albums/w576/glenn210/Classic%20Bike/Hodaka/I...
- Wed Mar 01, 2017 8:59 am
- Forum: HODAKA CHAT GROUP
- Topic: Project Dirt Squirt
- Replies: 207
- Views: 80419
Re: Project Dirt Squirt
So i got hold of a Wombat rear guard at last. Hoping this will work as far as being able to fit a taillight. There certainly a difference between the Squirt and Wombat fenders. Wombat v Squirt guard.jpg This is the Wombat mocked up: looks BIG! but I think once the seat and light go on it may balanc...
- Tue Feb 28, 2017 10:26 am
- Forum: HODAKA CHAT GROUP
- Topic: Ace 100B+ mud apron
- Replies: 16
- Views: 4699
Re: Ace 100B+ mud apron
viclioce
Hodaka 90 ,100 use the same apron you can get it from Hodaka-parts.com part #939515 for $31.46 new
MTRob
Hodaka 90 ,100 use the same apron you can get it from Hodaka-parts.com part #939515 for $31.46 new
MTRob
- Tue Feb 28, 2017 10:15 am
- Forum: HODAKA CHAT GROUP
- Topic: hodaka
- Replies: 6
- Views: 2152
Re: hodaka
I did it without the exhaust pipe. It fired ran 2 secounds then i shut it down. Just wanted to know if it would start.
I don't have alot of /patience when it comes to hard work to see if it works. Didn't let it run for more then 2 secounds
MTRob
I don't have alot of /patience when it comes to hard work to see if it works. Didn't let it run for more then 2 secounds
MTRob
- Tue Feb 28, 2017 7:35 am
- Forum: HODAKA CHAT GROUP
- Topic: '72 Wombat (94) Stopped on me twice
- Replies: 54
- Views: 18495
Re: '72 Wombat (94) Stopped on me twice
Sorry got the oil to gas mixed up I put in less oil and more gas, to cut down on the oil. quit fouling plugs ever since I have had no problem at all
MTRob
MTRob
- Mon Feb 27, 2017 11:50 am
- Forum: HODAKA CHAT GROUP
- Topic: '72 Wombat (94) Stopped on me twice
- Replies: 54
- Views: 18495
Re: '72 Wombat (94) Stopped on me twice
Bev Now to finish this story, now ready to kick it over, this sucker better run, one kick nothing, second kick fired right up. The idling was off so had to adjust the carb abit was stilll running pretty good it was smoking more than it should so i new it was running rich. Adjusted the air fuel mixtu...
- Sun Feb 26, 2017 10:28 am
- Forum: HODAKA CHAT GROUP
- Topic: '72 Wombat (94) Stopped on me twice
- Replies: 54
- Views: 18495
Re: '72 Wombat (94) Stopped on me twice
Hello Bev When I rebuilt my 125 94A Wombat engine, I ordered all the parts needed for the engine rebuilding the engine was the last thing I did after I had rebuilt (restored) all the body completely done with brand new wiring hooked up to everything even the turn signals, head light everything. Then...
- Wed Feb 22, 2017 10:48 am
- Forum: HODAKA CHAT GROUP
- Topic: Project Dirt Squirt
- Replies: 207
- Views: 80419
Re: Project Dirt Squirt
The last I knew, Hodaka was a Registered Trademark of Strictly Hodaka. Has that changed? If not, you would need permission before doing this type of thing. My lawyer looked at the trademark, Strickly Hodaka only has the trade mark on a certain letter in the word Hodaka if you leave the o out and re...
- Wed Feb 22, 2017 10:11 am
- Forum: HODAKA CHAT GROUP
- Topic: Ace 100B+ mud apron
- Replies: 16
- Views: 4699
Re: Ace 100B+ mud apron
clarence
Title says 63, checked thr engine # and frame points to 63. real low Engine and frame #, I want you to take a good look at that engine
different looks than other 90's i have looked at. Did I read your going to get to my 125 wombat engine or was that a dream.
MTRob
Title says 63, checked thr engine # and frame points to 63. real low Engine and frame #, I want you to take a good look at that engine
different looks than other 90's i have looked at. Did I read your going to get to my 125 wombat engine or was that a dream.
MTRob
- Tue Feb 21, 2017 9:42 am
- Forum: HODAKA CHAT GROUP
- Topic: Ace 90 - Blank Side Covers???
- Replies: 20
- Views: 6985
Re: Ace 90 - Blank Side Covers???
Clarence
Take a look at my 90 engine when I was rebuilding it alot pointed to Yamagouchi parts. the side covers don't have hodaka on them
look at the head. This is an original bike my fatherinlaw bought new at the dealer in Great falls MT. But all Hodaka parts fit.
MTRob
Take a look at my 90 engine when I was rebuilding it alot pointed to Yamagouchi parts. the side covers don't have hodaka on them
look at the head. This is an original bike my fatherinlaw bought new at the dealer in Great falls MT. But all Hodaka parts fit.
MTRob
- Tue Feb 21, 2017 9:24 am
- Forum: HODAKA CHAT GROUP
- Topic: Pride & Joy
- Replies: 25
- Views: 9453
Re: Pride & Joy
I Already built a platfrom on the wall of my shop to put two bikes I restored on. Its winter here and my boat is in the way of putting them up. I have a 12' banner on the wall that says Restored Classics Hodaka. another sign next to the banner the says. Roberts Bikes Don't touch them Don't move them...
- Tue Feb 21, 2017 8:59 am
- Forum: HODAKA CHAT GROUP
- Topic: Ace 100B+ mud apron
- Replies: 16
- Views: 4699
Re: Ace 100B+ mud apron
Clarence
1963 title says that, Engine # PO262 frame #AO259 Apron Found on Ebay after searching longtime.
MTRob
1963 title says that, Engine # PO262 frame #AO259 Apron Found on Ebay after searching longtime.
MTRob
- Mon Feb 20, 2017 12:01 pm
- Forum: HODAKA CHAT GROUP
- Topic: Ace 100B+ mud apron
- Replies: 16
- Views: 4699
Re: Ace 100B+ mud apron
new one
MTRob
MTRob
- Mon Feb 20, 2017 11:40 am
- Forum: HODAKA CHAT GROUP
- Topic: Ace 100B+ mud apron
- Replies: 16
- Views: 4699
Re: Ace 100B+ mud apron
This is as picture on the apron as I can get. click on picture to inlarge Ithink.
If this works
If this works
- Thu Feb 16, 2017 11:10 am
- Forum: HODAKA CHAT GROUP
- Topic: Handle bar covers
- Replies: 0
- Views: 911
Handle bar covers
Hi guys found these on ebay check them out most models. Cool addition to our bikes
[attachment=1]Hoadad Handle Bar pads 002.JPG[/attachment
[attachment=1]Hoadad Handle Bar pads 002.JPG[/attachment
- Wed Feb 01, 2017 11:39 am
- Forum: HODAKA CHAT GROUP
- Topic: chrome gas tank dent repair
- Replies: 4
- Views: 3466
Re: chrome gas tank dent repair
You have to have your wifes high watt hair blower.(propane tank) Bought the dust spray keyboard computer cleaner. You can buy it anywhere it gets real cold spraying on the spot you wont to pop out, Once you see the spot turn ice cold . Hit it with the high blowers heat and watch the the small hole t...