Sounds good. Didn't see the number you posted! Next time for sure!!! ; ) Victor

Yes, I think so! Boy I hate being stupid! I went back and read thru my manual again and it said exactly the same thing! I was just reading thru it too fast, a bad habit I've never been able to correct! If I would just slow down and take my time and read more carefully/accurately, I wouldn't get myse...

OK Ed. So where is this "Official" manual? Is there an online resource to view it? Or is it something I purchase from Strictly Hodaka? Would like to know, would like to see how much different it is. ; ) Victor

OK. Went out and got my second set of cases & another kick shaft. I saw on the second shaft where the clip is mounted over the narrow end of the retainer. also noticed a space, which looks basically like two ridges, at the back end of the right case. This space is just a little bit wider than th...

Ed. We obviously have different manuals! Mine is from Bill Cook at hodaka-parts.com. Which one are you using? Is there an online one? Mine doesn't show much. Just someone holding the kick shart assembly as its being inserted back I to the case. All it says is insert the first three gears on the coun...

OK, I think I'm beginning to understand the situation now. To this point, I have only been putting the clip on the end of the shaft and sliding it up to the bearing retainer. Now I am understanding that it needs to go OVER the narrow end of the bearing retainer. But if this is true, then it must be ...

Sounds good! Dress warmly too! Lately our highs have been in the 30's to low 40's and lows in the teens to 20's. It's winter here for sure! Here's my cell number 5 zero 5 nine 1 three 0 five 5 eight!

Was this guy by any chance someone named Chris from San Antoinio? Kinda looks like his bike! Jus askin', that's all. ; ) Victor

Ok. It's a FrankenBike! The engine itself is a model 94 bottom end with a model 95 top end. That's the way I got it! When I say "Bearings falling over" it's for lack of a better way of expressing it. I said "it FEELS like it" as in the resistance leaves the kick arm. I can't say ...

Hi and welcome! There are two manuals you should get, I believe. For the 1972 you should get the manual for a the Model 94/94A Wombat. They are very similar with minor differences in things like exhaust pipes and such. You can look at the serial number on the right front engine case by the clutch le...

OK. Here's the deal. Put her all back together again! For the second time, I gave her one kick & the kick shaft loses ALL resistance! I'm really getting tired of this failing! Everyone suggested that it was the kick shaft bearing retainer failing. However, upon disassembly, there was no damage t...

Any of you folks in my area? Would love to meet and maybe ride together. I live on the south side of Santa Fe, not far from the Country Club! Let me know! Thanks! Victor

Mark. I have a Frankenbike! LOL! It consists of a 1976 Model 03 frame/rolling chassis, with a Model 94 bottom end and a model 95 top end. I can confirm the bottom end by the serial number on the casing. the top end I confirm by the exhaust port and gasket required. I just got new seals and bushings ...

OK Ed! I follow you. I will mount the big gear on the main shaft and see if I can turn the gears and move the control rod! S
; ) Victor

Mine did the same thing. Had to replace the O ring seal on the inner surface of the countershaft. Mine would only leak when full and leaning on the kickstand. Once it lost about 6-8 ounces it would stop leaking because the oil level wasn't high enough for it too leak out around the control rod. Don'...

RayRay. I have a whole slew of carb jets, needles, slides, caps, etc. if you need any carb parts I have a "ShiteLoad",and will never use them all. Some used, some new, multiple sizes. And about 20 or so bowl gaskets I'll never use either! Let me know if you need carb parts! I got a double ...

So Ed, are you saying that if I put it back together (in which case I can't rotate the gears) that when I start it up I shouldn't have any issues? That's fine if il this is a correct statement. Maybe just depressing the kick shaft will move things enough? I just don't want to keep screwing things up...

OK. I put the newly rebuilt control rod/counter shaft assembly back in the transmission. But, every time I close up the cases, the control rod won't move in and out. I've tried it with the control rod pushed all the way in, (5th gear I believe) & with it pulled all the way out (1st gear?). It mo...

Great! Easy to remember now! Thanks for your input!

Hi all! Have a question. I am rebuilding a bottom end on a Model 94 motor. Have the transmission disassembled. The one thing I did not take notice of was the way the gears go back on the countershaft. One side of each gear is smooth & flat, while the other side has an elevated portion nearest th...

Where do I find these Elves??? I assume this means I have to split the cases? I was hoping there might have been a simpler answer! :cry: I have a model 94 motor. I'm guessing it has the older weaker part you speak of. Just my luck too! I've been working on this bike since early May and finally had h...

OK great news! I got the motor running and solved the shifting problems. However something seems to have gone wrong with the kick starter. Now when I kick down on it I does not turn the motor over and feels like a ratchet when pressing down. It moves way to easy. Did I break something? Did something...

Here's my restoration I've been working on. It's a 1976 Model 03, but it has a Model 94 motor in it!

Hello and HELP! I have a 1976 Wombat 125. It's a Model 03 frame but a Model 94 motor. I've been working steadily on this bike for the past 3 months, and little by little have been making it a nice bike again. It came with no lights except an aftermarket tail light which was not connected. So I have ...

Hi! I'm a new member and a fairly new owner of a 1976 Wombat 125. Here's a question I need answered. I know I have a Model 03 frame, and, I know I have a Model 94 motor. My question is, can you tell me if this is an original combination for these two components? The frame serial number matches the V...