Good Luck to all the Hodaka, representative and sellers at this great event, if you are in the area get to the show. Hodaka is #1 Hodakapartsidaho, Bruce Young

Tether keep me up to date on how the parts search goes, I may have contact,s other than Terry whom can help. But Terry is the best supplier that right off the top of my head for best resource for info and parts and pieces. The purple tank bike I have seen before on post,s and maybe even at Hodaka Da...

Tether, good find, now if you are looking for items to complete the project, I would suggest first contact Terry Larson at Hodaka-part INC in Missouri, send him an e-mail Terry@hodakaparts.com. He has done a lot of work in the Steens bike building process, in the past few years, he has some parts an...

Ed, is the 03 cases compatible with any other models cases or inside parts. I understand the Cyl., switches over to other models but what about the trans, crank and etc crossing over. Bruce

Victor, Looking at your overall Hodaka experience and where you are now, you have used your $$$ wisely and time more wisely, keep it up. You did not go out and buy first bike available, you watched and listened to the Hodaka World (friends) and for little investment, you have wisely invested in the ...

Good luck with the operation, and I hope you get back at it quickly, the Hodaka world will miss your post,s. You have a loyal following. Get it done and get back to working on those bike,s . Bruce Young

Victor, I knew you had done a great deal of restoration projects, I was just waiting for your input. Thanks Bruce No story but several years ago I had a customer in Montana, whom was legally blind, he and his wife restored a Hodaka over a period of two years by polishing and cleaning many parts like...

Max, would a brass grinder brush work better and a follow up with ten foil. Thanks for tip. I get people whom call all the time for fair to good shocks, if I have any, maybe they should take ten minutes and try what you did. As usual you are a inspiration to those out there whom just don,t run out a...

Might suggest something lots of 2 stroke riders did back in the day to cut noise, old VW tail pipe, its chrome probably close to same size needed and it can be shortened to work just as well, has a internal screen and baffle built in Take a look at this. other way is to find a FMF short silencer and...

You will also note the one with an X on the face of guard has rather square or flat top, the other ones have rounded top. Like Bill said ether one can be made to work with a little back yard engineering. Its the Hodaka way if you don,t or can,t find an original chain cover. Bruce

Dan, I would still refer you to post a few weeks ago, I think someone in the post was using a speedo repair person somewhere, sorry good luck with the refurbishing project. If you do find someone whom will do the speedo, please let me know whom, and we can keep in our records for future referring. H...

Dan there was a very good post on this site a few weeks ago with pictures and suggestions on refurbishing speed o. Take a look, tool to start with bevel removal is available at Home Depot and Lowe's in the paint dept no charge. Try it yourself. Bruce

JPark, if you ever need a cover or misc parts for your test clutch, to help with the cover issue please don,t hesitate to contact us Hodakpartsidaho.com 1--208--571--2823 we will be happy to send you parts and pieces to examine and work with at no charge, just cover shipping. Bruce Young

Max, this should not come as a surprise to anyone, engines and bikes that look untouched, only upon closer inspection, like you say "someone had been there before" and with little knowledge or know how, tried to make things work, its the "vintage Hodaka Way" and I am sure other m...

ED, First Merry Christmas to you and yours, I like the way you went about determining the measurements on this clutch question, I have one question, since you found the cover plate is not as precise in the measurements of the holes cut into it., does it matter that much, as long as the screws and sp...

Welcome Jpark, to the Hodaka World and Hodaka Club forum, you have come to the right place to ask questions, and get help with your restoration project. You mentioned you are in BC, we have a few customers whom live north of the border, whom I know can help with your project as well. If you can send...

Hello, Please is it possible you can supply some pictures of said cover inside and out, via my e-mail byret208@hotmail.com Hodakapartsidaho.com Bruce Young, upon seeing pictures, to the info you sent I might be able to help you or at least send you to a location that can. Please let me know 1--208--...

Mid Texas, in the high 70,s going down to 55 today lite rain today only then back up to 70 for next week at least, Dec. 5th have to start heading home to Idaho, will have to watch weather conditions a lot to get our 5th wheel and truck back across Nev into Idaho, snow and rain. But remember guys its...

Hey guys, just got off phone from Terry Larson, and he indicated he had just received a load of seat foam,s don,t know which models and I know he has some covers, maybe not one for the bike you are looking for but it would be a 1st try if you working on a Hodaka and replacing seat items, give him a ...

FYI; Hodaka World after having been in the Motorcycle world for over 40years, and worked in the industry during that time, bottom line always try to use oils that where blended for motorcycles, transmission, engine and forks and shocks, oils, 95% of the current line of oils used are blended specific...

Hello, CR98- I have a client in Eugene, Oregon whom has a yellow framed bike, contact him at 1--541--968--3769, K C Titzie. OK to call him this might be your dads bike. Bruce Young

Hello, Bevman, fantastic photo,s and info on how to work on a Hodaka speed o. I look forward to the final round of photo,s and progress on the rebuilding or at least cleaning of a speed o. Please in you final post, give a idea of how long the whole rebuild took in time. This info is extremely valuab...

Matt, good suggestion, but a Large "O" ring of similar size might work just as well and you can get those in round as well square configuration if nec., but it would be nice to find a true speedo bezel gasket from anything that would fit perfect, its not a big problem but its one of those ...

Hello Bev, I agree with Matt, please if it is possible, send more pictures of removal and replacement of bezel, that is the most important step. Speedo work stops most Hodaka owners, whom are having issues with locked up speedo or speedo cable. Its very possible one could start a little side busines...

Joe, I understand that the original type condensers have been available from other brands of machines, and if that is the way you wish to go, that's OK, but many of the condensers out there from other countries being made today do not have the same quality. Be careful, one more thing, there are Hoda...