Thank you Dale, that is exactly what I needed. Bruce

What the two sizes of c-clips used to hold things together, on the shift shaft. There are two sizes, need info for a future project. Thanks

Sizes of the shift shaft c-clip that holds it all together, There are two sizes and wish to know what they are.

MERRY CHRISTMAS TO ALL!!! From Hodakapartsidaho.com

If one does not want to do themselves or try this suggestion, I know Greg Watkins in Arz does rebuild them as well for you phone number is 1--626--324 0303 does a great job, but thanks for sending in the How to do the fix, lots of the kickers really get worn out,.

PS, Ed, yes I would volunteer to help do the Eng, builders picture and history story development to be put in Resonator, this will go right along with a Resonator I have proposed to Gary already for the dividing out the Tech part of resonator to a presentation call "Hodaka Tech-Bits" this ...

Ok, Clarence and Victor, the Calendar is a great Idea, but I might suggest, that Pictures submitted be of Non-professional builders bikes , reason, we have seen hundreds of pictures of the Professional builders bikes all through-out the years, no disrespecting their work, but lets look to the builde...

How many of Hodaka Club members would like to see an award, given out lets say three times a year, to Best Hodaka Eng shop, and Best Restorers. For recognition of their job,s well done. It would be in the form of a Plaque that they would receive. They could hang it in their shop or home. We have spe...

Rkaren is your man, he is a Hodaka electrical expert contact him.

Thank you whom-ever, whom updated the Forum, resonator tech look up area, I have indicated I was not going to make as many commits about things in the Forum, but again Thanks It has taken a long time to see this happen, but good things take time. Only one more request, would it be possible to go one...

Jpark, like thrownchain suggested why not source out a replacement head, you did not indicate what model of machine you need the head for. There are hundreds of good used heads and cylinders and old motors laying around the Hodaka World, you just need to tell us what eng. you need the items for and ...

Thrownchain, I suggest you contact fellow club member, Roger Karen in Utah, whom is building wiring harness,s for various models, he has a lot of info on wiring needed and parts and pieces needed to make things work correctly, His phone number is 1--435--994-0534, e-mail address; roger@karren.org. T...

Forum followers, I would like to see someone, find the latest, Resonator index that was put together a couple of years ago on info about "how to do things" and bring it up to date to present and keep it updated lets say every 6 months, referring to tech info only items, It would also be ni...

Hodaka World, Our Leader Ed (club president) did a very good id article in the resonator several years ago that explained how to id the two type of Mikuni 90-100 carbs. Take the time to look it up its in the index area. Even has pictures. Also one there explains the two diff tops, and fitment and et...

Hello, OK you check,ed Hodaka-parts on- line parts check to no avail, I might suggest you contact Terry@Hodaka-Parts.com direct via e-mail or phone, 314-313-5635 Many time,s items are in stock but not put in the computer system as of yet. You might be surprised the amount of items that are so vast T...

MT. I have found several engines with smooth side case, I understood that those where for the early ACE 90 bikes I have an eng., in an early machine under frame number 100 that has the cases info turned off them. Those case where the cross over pasts from Fuji/Yamaguchi era. When then the engines we...

I know that there was a manf of new reproduction tops that where manf. there are two diff types of carbs and the tops where made to fit each. I think that maybe Greg Watkins in Arz has the manf of those tops now. Here are some pictures and ref of tops, if pictures don,t show up you can go to this si...

Victor to make you feel not alone, tried all those idea for four days to no avail., on the O3 stuck motor I have, so end the end, I had to drill out piston to get it to break up and budge. The engine will have to be completely taken apart and cleaned and inspected. All new parts brg and seals will h...

Hello, ossa95d, bobv-7662,darrell, Thank you very much for the additional information, working on changes in listing now, about 1/2 way thru new info I received, then I will compare my old list to that new info and make adjustments and etc. Final faze of this project is to add in and change info abo...

Thanks, that name was on some info I just received and is added to the new list you will be able to see shortly, I will let everyone know when I have made all dealer additions and changes so you in the Hodaka World can enjoy and make comments, please note there will be other changes that will take p...

Victor, It seems to me it was like Clarence said, Pabatco, probably asked for something that kept Mud and etc out of the engine compartment, and the factory found an inexpensive way to do that to keep cost,s down. Yes its a material that does not last"forever", but at least on most of the ...

I have speak up, there is a Indian Casino, very close to event, call Wildhorse Casino, the rooms are not cheap but can be close to going rates elsewhere in Pendelton. I have as well as other club members thru the years, it has a very clean and reasonable RV area. Plus restaurants and bowling, and ot...

Cruisermar, thank you for the location, please give me a phone call 1--208--571--2823 during week, and I can give you some contacts in your area. Bruce Young

Hodaka, "Dealer and Distribution list", project, Many of you have seen and contributed names and info on lots of old Hodaka Dealers throughout the US and Canada, those where posted on our Web site; Hodakapartsidaho.com, and we would like to say thank you. Well its time to make changes to t...

Cruiser, what part of Oregon do you live in. I think I have a few people,s names that are knowledgeable that can help, but need to know where you live. Thanks Bruce