My opinion is the fender is bent upward as the fender mount/number plate bracket coming off the frame loop is also bent upward. A rat fender should have a consistent radius distance from the fender edge to the tire (4" on my 93B). You can heat the fender and re-radius, but lots of patience is r...

Athena, Bad Rock areas are in north eastern Oregon(east of the cascade mountain range).As of today, no major fires east of the cascades. Impacted areas (1 million acres so far) are in the western cascades and coast ranges. Forest areas and trails are impacted in the cascades and will be shut down fo...

Kevin -
What year is your Dodge? Did it start life as a warlock or midnight express?

I own a 71 and 72 B+ and both have the overlay sprockets.

Yes, Little Creek show.

For those who follow Graveyard Cars show on the Motortrend channel, attached is a picture of Mark Worman checking out my 72 Super Rat at a car show in Shelton WA. Mark is familiar with Hodakas and mentioned that the GYC shop has a Road Toad that he occasionally takes for a spin. Truck is a 79 Dodge ...

19 Hodakas were run through the Mecum motorcycle auction in Las Vegas over the weekend. All sold. Here are some examples: 73 Combat Wombat restored-$5500, 72 Ace 100B+, 385 original miles unrestored-$8250, 71 Super Rat restored-$8800, 73 Dirt Squirt 100 restored $7150, and the winner is a restored 7...

Found a few more parts to add to the list.

Searching through boxes today and found some misc. Super Rat and Ace 100B+ parts from past projects. Even found an elusive SR chain guard. Willing to sell so shoot me an e-mail for info at [email protected] for list.

Here is how I haul my 1972 Super Rat using a 1979 Dodge Lil Red Express. Lots of red paint and chrome-on both!
Enjoy.

Couple notes:
Only the 93 B came with cleated foot pegs. The 93,93A, 93B DID NOT have the brake switch mounting holes on the front backing plate.
The correct backing plate is an elusive part to find.

I have considered building a 93B pipe as you indicated. I have the original pipe but the spark arrestor was cut off and a stinger welded on, effectively making it a 93A pipe. The irony!

Anyone have or know a source for a 1972 Super Rat 93B exhaust pipe? Seems to be an elusive part.

My 93B Rat purchased from the original owner came with Riken tires, which were installed by the dealer. The Nitto knobs are not very deep so some dealers swapped out for the deeper knobs of the Riken or Yokahama. The rear Riken is the correct 3.25x18 and in near NOS condition. The front however was ...

Correct. A 35/35w would work in a road toad and wombat, not an ace100 or B+ which requires a 15/15w

D Victor reply sent.

D Victor-

I have a NOS pair of the KM340mm rear shocks for a Ace100 92b. Let me know if your interested.
Mike.

Does anyone know if the factory OEM fuel line for 93B Rats and Ace100B+ was clear or black?

I purchased a NOS tool kit & pouch 3 years ago on Ebay for $100. Contains a 420 master link and carb main jets specific to a Ace 100B+. Recent NOS tool kit sold for $249(wow) but I do not think it had the master link and jets. Yes they are hard to find and prices apparently are going up. Check E...

The Ace 100B+ front fender is identical to the 93 Super Rat with the exception of lower holes and an inner support strap predrilled for a mud flap. Some options I have done on restorations; remove the lower strap, fill the holes with stainless rod and polish. Metal shop did this for me for $40. Hoda...

Has anyone purchased rims or spokes from Vintage Ave. Shop on EBay? Would like to know the quality since they are manufactured in Thailand.

Thanks Brian.

Replacing a damaged stinger on a 1971 Super Rat exhaust pipe. Would appreciate if someone could provide the length of the end pipe stinger. Thanks