doing a great job and nice photos.

Hello Rocky, glad to see you are back riding the Hodakas! What about getting 97 or 98 swingarm and having Hodaka Dave extended it 1-1/2" or 2" longer? Better than stock and your upper chain guide will be in the correct location. Thats what I will do with mine. Richard

I don't post much anymore but I do read the messages from time to time. Want to wish all my Hodaka brethren, peace on earth and a Merry Christmas.

Thank you fellas, look forward to seeing how it handles at the track.

My brother Paul's Project Wombat was started last March and finally completed December 19 2021. Modified 1972 Wombat frame, 03 front end, clarke tank, PP replica fenders, modified elsinore seat, extended the swingarm 1-1/2", relocated and modified the rear brake pedal (Ossa style) PP number pla...

Hey Dirty Rat, nice to hear from you. The instructions state to set it at 2mm BTDC Max at 4mm BTDC, so the stock 2.4mm sounds about right. Hope this unit works as well as the PVLs did.

I was wondering if anyone has used the HPI ignition that DC Plastics sells and what timing did you use? This going on a combat wombat (modified). Thank you.

Hello Victor, Yes my old 95 carb has a lot metal corrosion. Even though I rebuilt it, the reliability is not there using it on a race bike. Thank you for the jet numbers. Richard

I used a torch , PB Blaster, and rubber or plastic mallet to get my last top end off. The key is a lot of heat on the outside of the cylinder to expand and soak it with blaster. Start tapping the cylinder but don't break those fins in the process! I then start trying to insert some small wood wedges...

Hello everyone! I am replacing my old 95 carb with a 98 Super Rat carb. Stock porting etc. What pilot and main jet should I start with? Thank you

Yes , Tommy stated that the bike was very fast with the Harry Taylor modified motor. I read that Tommy had a flat tire and DNF that race. It would have been cool to see a first place with that one!

Looking good keep it going!

The old Ford dark blue engine paint is pretty close to matching the 98 super rat frame color. If you use a paint that has ceramic or epoxy two part spray paint that Eastwood sells, it is very durable.

The rear spokes are part number 939211A. These are used on the 93 super rat and combat wombat rear wheels. The 97 super combat spokes are different and will not lace up on the old wombat rims.

Hey Rich, The PVL is a really neat ignition system. Make sure you have a separate ground wire going from the frame to the coil. I have also seen others install a ground wire from the cylinder inlet stud to the frame under the tank. Good insurance. Richard

Its been awhile since I posted something but working with the public is one of toughest jobs I know. I worked at Disney World for twelve years and was ready to leave it. They call it the happiest place on earth...well they didn't talk to the employees either. LOL Then add the fact that you are not w...

Very nice! I think the tanks have a cleaner look with out the decals on the 98's. Just my two cents.

The procedure I use for cleaning my standard DID chain after racing mx, is fill a small plastic dish pan with simple green and warm water. Soak the chain and clean with a brass bristle brush. Hose it down with garden hose. Hang the chain and dry it off using an air compressor. After that I spray wel...

Hey Steve, that is awesome you still have that bike after all these years. I know a lot of us wish we still had our new Hodaka!

That is a really cool story and a happy ending!

Hello JackM, I have used the Prevail sprayers on small touch up work. They work well as long as your paint is thinned properly. I suggest that you warm up the can in some very warm water before spraying with. It will increase the pressure so what. The longer you spray with it, the can starts to cool...

Thank you for the photo Squid and for your instructions. I have the rim now laced up but the outer spoke are over the flanges of the inner spokes on the hub....not right. I think the problem is following the instructions in the factory manual with a spoke overlap of three which these spokes are desi...

Thank you both for the encouragement. I figured if I could rebuild a Hodaka engine, surely I could rebuild a wheel.......not so fast little grasshopper! LOL

This is my first time trying to replace the spokes on my combat wombat rear wheel. I am using the heavy duty Buch. spoke set and following the instructions according to the wombat/combat manual. The inners line up well as far as I can tell, but the outters are giving me a fit! Any one have suggestio...