I was just going to replace both crank seals but after your good advice I will check for leaks before and after installation with the pressure test all over the engine. When I first bought it and got it running is was leaking heavy out of the trans vent (it was non-running for quite some time), then...

I have a 1977 Hodaka 80cc dirt squirt. It seems to run and idle fine and does not smoke that bad. I have pressure tested it and at 6psi it leaks down fast to 4psi and then will hold for a long time and not leak down further. Just discovered when its idling, even cold just after starting it, I unscre...

I did a leak test on my 1977 Hodaka 80 and when I pump it to 6-7 psi it leaks down to 4psi and holds for hours. Anyone have any ideas, most likely original seals.

Can anyone please tell me which aftermarket carb fits up to the 1977 dirt squirt 80 or what is the mod to fit up a different carb to the intake pipe which is 22.85 mm. Thanks FB

Has anyone discovered Hodaka ever installing the incorrect engine with the wrong # on the assembly line? I have on steer front plate Q-10237 Frame 10237 engine T-10267. Is someone out their have my engine cause I have yours. I may part this out or next spring if I have some good offers on parts.

Thank you

Does anyone have the mag coils resistance values and and how to test them also a wiring diagram for the 1977 Hodaka 80 dirt squirt. Thanks FB

Hi, Just bought a 1977 Hodaka 80 dirt squirt and need parts. Throttle grip and throttle twist grip pipe tube and both clutch and brake levers and holders and mixing chamber top for carb and carb slide and driver seat and if anyone has the wiring diagram would be appreciated. Thanks FB